Manual

24
With Tempo, the speed of the internal clock generator is controlled.
Start and stop with the Start/Stop buttom.
The Sync cable must have all pins connected. Some Midi cables do not have all
pins connected, and do not work as a Sync cable!
Midi Mode
The Acidlab Bassline3 can also be controlled using MIDI Note Data.
The Bassline must be connected with a Midi-cable on its Midi In, to the Midi Out of
the Midi-master (Midi-sequencer, laptop, …).
To use the Bassline3 in Midi Mode, switch off the Bassline using the On-Off slide
switch on the right side of the rear panel. Now hold the the Write/Next [Midi] button
and switch the Bassline back on with the On-Off slide switch.
You can see that you are in MIDI Mode when the LEDs of Step 1-4 are
illuminated.
Repeat the same process to resume using the internal sequencer!