EURACOM® 141F 18xF Φ Φ 26xF Φ 141 18x Φ User manual for PABX systems Systems - that connect Φ 26x
Important notes to start with Our contribution to environmental protection • This instruction manual is printed on chlorine-free paper. • All plastic parts of your PABX consist of fully recyclable material (PC+ABS-FR). Attachment to EURACOM Manuals • Supplementary Services, mentioned in the documentation, may not be abvailable in all countries and areas. Please consult your local distributor for further informations and for assistance.
Table of contents A word in advance 1 Right around telephone conversations 2 More than only telephone calls 3 The EURACOM Making telephone calls and more 6 This is how you find your way 6 Telephone is not telephone 8 To call someone 12 To accept, take over, forward calls 16 Making three party calls 19 If it is engaged 21 Being obtainable everywhere 26 Parking a call 37 Using the door intercommunication system 38 Programming an alarm call 40 Switching lights, heating, alarm system
Table of contents Making settings easy Switching on/off call waiting protection 52 Switching on/off intrusion protection 52 Switching on/off call protection 53 Switching on/off automatic connection to external line 53 Assigning/deleting speed dialling numbers 54 Programming/changing PIN 55 Transmitting telephone number not anymore/again 56 Determining, which telephone number will be transmitted 57 Switching off all special functions in one go 59 Influencing time controlled switch over 60
1.
1 A word in advance The EURACOM - Making telephone calls and more With your EURACOM PABX you have chosen a high quality and future proof product. From now you can benefit from all advantages, the EURO ISDN is offering you. Making three party telephone calls, transferring calls to every place of the world, calculating charge information in a comfortable way and many more. And everything with already existing analogue terminals (standard telephones, fax machines group 2 and 3, modems, answering machines).
Structure of the individual pages 1 Start of a new subject. A word in advance This is how you find your way Start of a new function. Overview to the function. Conditions for the function. Operation of the function. + ... All symbols are described on the front folder. ISDN telephones, network provider ... All explanations printed in italic are described on the front folder.
1 A word in advance Telephone is not telephone You are operating all functions of an ISDN PABX via the connected telephones. However most different models of them are in the market. For some telephones the operation is different in some points from the description in this user manual. Thus in this chapter it is described, what has to be done, to operate the ISDN PABX also with such a telephone. ISDN telephones Lift the receiver of your telephone and enter a telephone number.
Lift the receiver of your telephone and enter a telephone number. If you hear tones or a crackling noise during the dialling process, you have an analogue telephone. For all analogue telephones It may happen, that it is impossible to forward calls, but instead you “throw the caller out of the line”. The same may also occur, if you want to have an enquiry call to another subscriber and the caller shall be held in the line during this time. In this case enter # * 701 # once with receiver off hook.
1 Telephone is not telephone A word in advance 2) To forward calls with or without advance notice, press key 1 and afterwards enter the telephone number of the subscriber. It is not possible, to operate a hold or broker´s call connection. If your analogue telephone uses tone dialling Tone dialling (also dual tone multiple frequency) means: during input of the telephone number you hear a different tone for each figure. In this case it is possible to operate all functions of the EURACOM, as described.
2.
To call someone 2 Right around telephone conversation Before calling someone you should be sure, if the automatic connection to external line is switched on for your telephone. Therefore lift the receiver. If you hear the internal dialling tone, no automatic connection to external line is switched on. How to switch on the automatic connection to external line, can be found on page 53. You are able to dial faster via speed dial numbers, prepared for often used external telephone numbers.
To call someone Project conversation You want to assign the cost for an external connection in the charge analyzing program to a project (--> page 75). Therefore you assign a project number to the connection. + project no. Number from 000 - 999, 3-figured, eg 005 for project 5. External telephone number, always without 0 for external line connection (eg 01234 56789). 2 number Right around telephone conversation #95 Private conversation You want to make a private external call in a company.
To call someone Selecting external line purposeful 2 Right around telephone conversation In case of two or more basic accesses your telephone will be assigned to one of them automatically. Your telephone then is dialling via one external line of this basic access. But it is also possible to select an external line of another basic access purposeful - eg, if your external line is engaged.
To call someone + #92 eg 1 number With this you determine, which device type shall be addressed by your call. 0 Multi function device (combined fax etc.) 1 Telephone 2 Analogue fax, group 2/3 3 Modem External telephone number of the desired subscriber. The terminal equipment will now be called with the programmed service identifier. Conversation without Least Cost Routing You want to inactivate the automatic least cost routing (LCR) for the following conversation.
To accept, take over, forward calls 2 Right around telephone conversation Your telephone is ringing and you want to accept the call. Or you want to take over a call from another telephone or from an answering machine (pick-up). All calls can be forwarded afterwards. Calls can come from internal, external, or from the door intercom system. With analogue telephones the calls may be distinguished from the ringing signal.
To accept, take over, forward calls Accept call waiting, conclude first conversation You are having a conversation and hear the call waiting tone. - You hear the ringing signal for internal call, external call or door call. Right around telephone conversation + You are connected to the waiting caller. If the call comes from the door intercom system, then you can open the door with the key sequence R # 7. Thus the conversation will be terminated.
To accept, take over, forward calls Take over call from another telephone (pick up) In case of several calls at the same time, you pick up the call having been received first. Thus these might also be calls for a fax machine or an answering machine. + 2 #4 Right around telephone conversation You are connected to the caller. Now it is also possible, to forward the call by first pressing the R key and entering the telephone number afterwards.
Making three party calls 1) Speaking to the second subscriber without terminating the connection to the first. The first subscriber hears the programmed music-on-hold. R number Internal telephone number (eg 12) or external telephone number with connection to external line (eg 001234 56789). Now it is possible, to speak to the second subscriber. For example for enquiry. If you replace the receiver now, both of your conversation partners are connected with each other.
Making three party calls ISDN three party + broker´s call in the central office 2 Both does only work, if you want to speak to two external subscribers - at the same time (three party) or alternating (broker´s call). Unlike the three party conversation, in case of the three party conference call there always will be occupied only one external line. Thus during your conversation also another subscriber of the EURACOM is able to make external calls.
If it is engaged There are following differences between internal and external “call completion on busy subscriber”: • Internally it is also possible to initiate call completion, if the subscriber does not answer. For example, if he is not at his place. • If you do not accept an internal call completion call, it will be repeated later - an external call completion call however not.
If it is engaged Reserving external line 2 Right around telephone conversation You would like to call an external subscriber (central office call) and receive a busy tone already after dialling 0 for connection to external line. This means, that all external lines are engaged. In case of automatic connection to external line you then hear the internal dialling tone after lifting the receiver. You can now let an external line be reserved.
If it is engaged You have dialled the number of an internal subscriber. However he is already having a conversation. You can now intrude to this conversation. This means, that you are connected to both subscribers afterwards. The subscriber you have called, then hears the intrusion tone. It is only possible to intrude, if the subscriber has not switched on call or intrusion protection.
2 Right around telephone conversation 24
3.
Being obtainable everywhere You are not obtainable at your telephone and therefore would like to divert your calls to another telephone. For that you have several possibilities. Which one will be the right for you, first depends on the fact, if you want to divert to an external or internal telephone. With “follow me” eg it is only possible to divert calls to an internal telephone.
Being obtainable everywhere: call diversions Call diversion “unconditional” You want to forward your calls unconditionally to another internal or external telephone. In case of ISDN telephones you can program this also in the menu of the telephone (--> „manual of the telephone“). Call diversions for door calls see page 39. Applying for internal telephones: The telephone you want to divert to, is not allowed to have a call protection.
Being obtainable everywhere: call diversions Call diversion “unconditional” from remote You want to switch on call diversion “unconditional” from an external telephone. During configuration a virtual subscriber must have had been programmed with remote control been activated (--> “Configuration”, page 85). You must have entered a personal identification number for your internal telephone (--> page 55). In the basic setting (default mode) call diversion can not be operated.
Being obtainable erverywhere: call diversions Call diversion “on busy” You would like to forward calls to an internal or external telephone in case your connection is engaged. In case of ISDN telephones this is also possible via the menu of the telephone (--> manual of the telephone). Call diversions for door phones see page 39. More Mehrthan als nur only telephone Telefonieren calls Applying for internal telephones: The telephone you want to divert to, is not allowed to have a call protection.
Being obtainable erverywhere: call diversions Clearing destination of call diversion “on busy” You want to make sure, that no destination for call diversion is stored any more. + #*62# - 3 More Mehrthan als nur only telephone Telefonieren calls 30 Now no destination for call diversion is stored any more.
Being obtainable everywhere: call diversions Call diversion “no reply” You would like to forward calls to an internal or external telephone, in case after a certain time there is no reply on your extension. In case of ISDN telephones this is also possible via the menu of the telephone (--> manual of the telephone). Call diversions for door phones see page 39.
Being obtainable everywhere: call diversions Clearing destination of call diversion “no reply” You want to make sure, that no destination for call diversion is stored any more. + #*63# - 3 More Mehrthan als nur only telephone Telefonieren calls 32 Now no destination for call diversion is stored any more.
Being obtainable everywhere: call forwarding ISDN call forwarding “unconditional”, “on busy”, “no reply” You want to forward external calls to an external telephone. If you operate the EURACOM on a PABX connection, all calls for the PABX telephone number will be forwarded; it is not possible to program call forwarding for a special extension. On a multiple subscriber connection it is possible to program call forwarding specific for each of your multiple subscriber numbers.
Being obtainable everywhere: call forwarding number The telephone number to be forwarded to, without 0 for connection to external line! Please enter carefully, otherwise your calls will arrive at an uninvolved person. # - You have now determined the destination of call forwarding. If you lift the receiver the next time, you normally will hear the special dialling tone, external, as soon as you have got an external line.
Being obtainable everywhere: call diversions Switching off call forwarding in case of PABX connection + Mode of call forwarding to be switched off: 1 Call forwarding “unconditional” 2 Call forwarding “on busy” 3 Call forwarding “no reply” eg 1 1,2,3 or 4: number of the basic access, the PABX telephone number belongs to. If you have only one basic access, you then enter 1. In case of two basic accesses read the configuration via PC (ISDN ports) or consult your distributor.
Being obtainable everywhere: call forwarding ISDN call forwarding per subscriber on PABX connection In case of a PABX connection the whole connection is forwarded with ISDN call forwarding. An individual forwarding per subscriber can not be carried out like this. To achieve this, you have to apply for the service partial rerouting (call forwarding partial rerouting) at your network provider.
Parking a call You are having a conversation with an external conversation partner and would like to continue the conversation from another telephone. For that you are able to park the call in the central office for up to three minutes. Your conversation partner hears an announcement during this period. In case of ISDN telephones you are able to park the call also via the menu of the telephone.
Using the door intercommunication system If the doorbell is ringing Someone is ringing the doorbell. In the configuration it was determined, which telephones should then ring (call distribution). For example in the head office. In case of analogue telephones you hear the ringing signal for door call. Some ISDN telephones show the information “door call” in the display.
Using the door intercommunication system Establishing call diversion for door calls (pharmacist mode) You want to forward door calls to an internal or external telephone, eg, if you are not present in the shop. The door call then will always be signalled at the forwarding destination. For this you need a telephone with master authorization (default). Establishing pharmacist mode V number 1 or 2: number of the port, your door intercom system is connected to.
Programming an alarm call You want to make an internal telephone ring at a certain time. For example to be reminded of a date. Or also to wake up guest in your hotel. For that it is possible to set up an alarm call for your telephone or for other internal telephones. In case of a single alarm call the telephone rings once at the programmed time. In case of a periodical alarm call the call will be repeated every week at the programmed days.
Programming an alarm call 2) Enter desired days + #*58 eg * Days, the telephone shall be ringing at the time, programmed before. Enter days one after another, eg 12 for mondays and tuesdays. 1 = Monday 2 = Tuesday 3 = Wednesday 4 = Thursday 5 = Friday 6 = Saturday 7 = Sunday * = during all days Your telephone will now ring during the programmed days at the time, programmed before. Clearing a periodical alarm call / time You clear the alarm call by clearing the programmed time.
Programming an alarm call Programming of a single alarm call for other telephones You want to program an alarm call for one or several internal subscribers. For example, to remind them of a date. You need a telephone with company authorization or master authorization (presetting). Switching on alarm call T #*421 time for alarm call hh = Hour: eg 09 for 9 am mm = Minutes: eg 05 for 5 minutes number Telephone number(s) of the internal subscribers, you intend to program the alarm call for.
Switching lights, heating, alarm system ... In configuration the control contacts are programmed for manual switching (--> “Configuration”, page 65). Furthermore remote control is activated and a virtual subscriber established for switching via an external telephone. A remote control PIN is programmed for the virtual subscriber (--> “Configuration”, page 86). If you want to operate the control contacts from an internal telephone, this must have a master authorization or company authorization.
For the safety of your children Surveillance of a room You want to monitor noise in a room. For example, to check, if your child is sleeping (similar to a babyphone). It is possible to do this from an internal or external telephone. In the room you intend to monitor is placed an analogue telephone of your PABX. This telephone has no call or call waiting protection. You have entered a personal identification number (PIN) for this telephone (--> page 55).
For the safety of your children Automatic dialling of a number After lifting the receiver a previous programmed number shall be dialled automatically. For example, that your children are enabled to call for help in an emergency case. It is up to you to determine the time between lifting the receiver and dialling, eg 10 seconds. During the period of 10 seconds it is possible to dial a number “as usual”.
Identifying malicious calls You are annoyed by an unidentified caller and want to identify his telephone number. The telephone number will be reported to you by your network provider as written report. The telephone number can also be identified, if the caller has switched off the transfer of his telephone number on his telephone. In case of some ISDN telephones it is also possible to switch on “malicious call identification” via the menu of the telephone (--> manual of the ISDN telephone).
Transmitting a code call A code call is transmitted to all internal telephones. Four different code calls are existing. You first have to determine the meaning of the code calls. For example: in case of code call 1 all shall meet for a discussion, in case of code call 2 a certain employee shall call back. If you enter the code call, all analogue telephones are ringing in a certain rhythm; some ISDN telephones show the code call in the display, others are not capable of showing it.
Using intercom If you operate one or more EURACOM P4 telephones in EURACOM mode on your PABX, the feature intercom is available. With intercom it is possible from every telephone on your PABX: • to make an announcement to all EURACOM P4 or • perform intercom with a single EURACOM P4. In this case the corresponding telephones will be switched to speaker mode (announcement) or hands-free mode (intercom). The EURACOM P4 must be operated in EURACOM mode and must be in idle mode.
Barring of your telephone You do not want someone making external calls from your telephone during your absence. For this reason you can lock your telephone. Internal telephone numbers as also programmed emergency numbers can still be dialled. To clear the lock again, you must have entered a personal identification number (PIN) for your telephone (--> page 55). Barring telephone + #*77# You have now locked your telephone for external calls.
3 More Mehrthan als nur only telephone Telefonieren calls 50
4.
Switching on / off call waiting protection You want to prevent someone from making an incoming call, indicated with “call waiting” during a conversation (--> page 17). For that you are able to establish a call waiting protection. The caller then hears a line busy tone. If you switch on call waiting protection in the telephone menu in case of ISDN telephones, the caller hears a tone to indicate free line (may differ depending on manufacturer), and the call is indicated in your display.
Switching on / off call protection If you want to prevent the telephone from ringing, it is possible to activate a call protection. The caller then hears a line busy tone. In case of some ISDN telephones it is also possible to activate call protection in the menu of the telephone. In this case the caller hears a tone to indicate free line (may differ depending on manufacturer). If call protection is switched on: • it is still possible to make outgoing calls.
Assigning / deleting speed dialling numbers You can dial often used telephone numbers faster and more convenient via speed dial numbers (--> page 12). It is possible to assign up to 200 speed dial numbers from 100 to 299. With programmed company separation (--> “Configuration”, page 71) each company receives 100 speed dial numbers. A speed dial number may also be only part of a telephone number; in this case postdial the rest of the number (eg direct dialling in number).
Programming / changing PIN For some functions of the EURACOM you need a personal identification number (PIN). With that it is guaranteed, that it is only possible for yourself to change the settings of your telephone. You have to program your PIN once before. You are able to change it afterwards at any time. If you should have forgotten your PIN, it is possible to set it to 0000 from a telephone with company authorization or master authorization (presetting).
Transmitting telephone number not anymore / again If you call someone You call an external conversation partner and want to prevent your telephone number from being transferred. In case of ISDN telephones it is also possible to program this from the menu of the telephone (--> manual of telephone). You have applied for telephone number suppression from case to case, CLIR, at your network provider. Transmitting telephone number not any more + #*511# - Your telephone number will not be transferred any more.
Determining, which telephone number will be transmitted The EURACOM automatically transfers your telephone number to your conversation partner, without the need for programming anything. With a single PABX connection this works without problems in any case. In case of a multiple subscriber connection, several PABX connections with different telephone numbers or a combination of PABX connection and multiple subscriber connection in some rare cases not the right telephone number may be transferred.
Determining, which telephone number will be transmitted Dialling via a multiple subscriber connection + #*50 eg 1 eg 0 With this procedure you determine the basic access your telephone is “making external calls” from. If this is engaged by two conversations, the EURACOM shall: 1 use the next free basic access and transfer the corresponding first telephone number. 2 not use another basic access. You receive a line busy signal.
Switching off all special functions in one go If you have switched on one or several of the following functions, you will hear the special internal dialling tone after lifting the receiver: • • • • Follow me (--> page 26) Call diversion (--> page 27 - 32) Call protection (--> page 53) Automatic connection (--> page 45) If you intend to change something and can not remember which functions are switched on, it is possible to switch off all functions in one go.
Influencing time controlled switch over Many functions are operated time controlled within the PABX. This includes switching to another call distribution or change to another provider of the automatic LCR. Concerning bank holidays, it might eg be useful, to switch off the automatic or force the change of day type early. There are the following three possibilities for switching, assuming, that you know, which of the periods is currently active.
Occupation management In ISDN your calls can be signalled, although you are already having a conversation - in your own place by call waiting tone or at other free subscribers of the call distribution. You already could be prevented from call waiting, but it was not possible so far to prevent other free subscribers of the call distribution from signalling.
Occupation management Switching off call waiting from central office If you switch off call waiting from central office (busy on call waiting), yet external callers will be signalled by call waiting only during an active conversation, if you are able to forward these. The function „Switching off call from central office“, indicates the central office in case of a call with the same MSN, that this MSN is engaged, if both B channals are already engaged.
5.
Analyzing charging information with help of the telephone It is possible with the EURACOM to capture call data from incoming as also from outgoing calls. To capture outgoing calls, your network provider has to provide you with charge informations. It is possible for you: • to print call data as protocol record during running operation or • to store call data in the EURACOM to let them be printed or analyzed at a later time.
Analyzing charging information with help of the telephone: Continuous print Determine how telephone numbers of outgoing calls shall be printed It is possible to establish an individual setting for each subscriber. If you determine nothing here, the telephone numbers are printed completely. T #*413 eg 0 0 1 2 number The dialled telephone number will not be shown. The complete telephone number will be shown. The last three figures will be substituted by „X”. Internal telephone number(s) of subscribers.
Analyzing charging information with help of the telephone: Continuous print Printing / not printing outgoing calls anymore If you do not determine anything here, no calls will be printed. T #*410 eg 1 1 0 number Call data of the following subscribers shall be printed. Call data for the following subscribers shall not be printed anymore. Internal telephone number(s) of subscribers. Enter the telephone numbers one after another. After each telephone number you will hear the confirmation tone.
Analyzing charging information with help of the telephone: Storing in EURACOM Settings for storage of call data 750 data sets for outgoing calls can be stored in the EURACOM. If 700 data sets are stored, all subscribers will hear the charge warning tone during line seizure. Then print the data sets in time and clear them to “make room again” (--> page 70). 75 incoming calls can be stored additionally.
Analyzing charging information with help of the telephone: Storing in EURACOM Determine how the telephone numbers of the outgoing calls shall be captured For individual subscribers. If you do not determine anything here, the telephone numbers will be captured completely. T #*413 eg 1 0 1 2 number The dialled telephone number will not be shown. The complete telephone number will be shown. The last 3 figures will be substituted by “X”. Internal telephone number(s) of subscribers. 00 for all subscribers.
Analyzing charging information with help of the telephone: Storing in EURACOM Enter individual tariff (hotel tariff) For individual subscribers. If you do not determine anything here, the tariff of 100 Pence per charge unit will be used. T #*415 eg 0300 number Tariff for charge unit with 1/10 Pence (4-figured from 0 - 9999). For example 0300 for 30 Pence. Telephone number(s) of subscribers. 00 for all subscribers. Enter the telephone numbers one after another.
Analyzing charging information with help of the telephone: Storing in EURACOM Printing / clearing stored call data You have completed the settings for storage of call data (--> page 67). It is now possible to choose between three different print-out modes: • Data sets of all subscribers, to make out a detailled calculation. The cost of a call will be calculated with the general tariff (useful: tariff of the network provider).
Analyzing charging information with help of the telephone: Storing in EURACOM Printing / clearing the sum of all registered charges The sum is calculated with the general tariff (useful: tariff of the network provider). And this is how the print looks like: PABX charge units Amount 6595,65 T #8 eg 3 - 3 Printing the sum. 2 Clearing the sum. The EURACOM is now printing or clearing the total of all registered charges.
Analyzing charging information with help of the telephone Programming charge limit You want to limit an internal subscriber to a certain amount for external telephone calls. For that you enter a charge limit. If the charge limit is reached, the subscriber will first be enabled to make external calls, if you increase the charge limit or clear the charge sum of this subscriber (--> page 71). The charge limit is taking into account the individual tariff (hotel tariff) of the subscriber.
Analyzing charging information with help of the telephone Displaying charges on telephone You intend to arrange, that on one or several internal telephones the registered charges for this telephone shall be displayed during a conversation. The telephone sets must have a display. But there are telephone sets available however, having a display but not the capability of showing charges (-->“instruction of the telephone set“).
Analyzing charging information with help of the telephone Determining print-out type The call data are printed continuously (-->page 64) and you want the calls of a day to be started on the top of the page for example. Or you want a call to be printed as single account separately on a page. For that it is possible to instruct the printer, to start with a new page and to print the header again.
Analyzing charging information via the charge analyzing program With the EURACOM it is also possible to analyze and print the 750 data sets and 75 incoming calls via a connected PC. The data will be registered in that case in the same way as in case of charge analyzing via telephone set. But in that case it is possible however to make the necessary settings in a comfortable way via mouse click on screen.
Analyzing charging information via the charge analyzing program < PABX configuration program > < Configuration > < Subscriber configuration > < Charges > Determine the calls to be registered Determine how to register the telephone numbers IMPORTANT NOTE! The individual charge tariff you enter here, is only effective, if you print out the charge sum of individual subscribers via the telephone (--> page 71).
6.
Cleaning Clean the EURACOM with a normal detergent, if necessary. In that case always use a soft non fluffy cloth. IMPORTANT NOTE! Detergents and water are not allowed to get in contact with the EURACOM. Electrical components may be damaged. Therefore: • Disconnect mains before cleaning. • Always moisten the cloth only slightly. Transportation If it should be necessary to transport or send your PABX, make sure to place it in the original box.
Look up The following tables show all settings, you can carry out for configuration and operation of the EURACOM. The last column shows the presettings (defaults) of the PABX. As long as you do not program anything else, the EURACOM uses these presettings. PABX connection Function Code PABX mode #*004x# x: 1=single system 2=sub system 3=sub remote 4=networked M PABX number #*003n# n: number 0=Master; 1=Slave M 0 COM-Port, setup Baud rate (CTI and configurator = max.
Look up ISDN basic connection Function Code Configuration Default M 2 DDI: PABX connection #*021 pc*rrr...# p: So-Port (1..2/3/4) c: ringing rhythm 0= default 1..4=Code call1 to 4 rrr: call no. M - Main system call number Country code (max. 10-digits) #*014rrr...# rrr: Main system call no. M #*010rrr...# rrr: Country code eg 44 - GB MSN: multiple subscriber mode #*020pmc*rrr...# Area code (max. 10 digits) #*011rrr..# M - So port protocoll #*005 px# p: So-Port (1..
Look up Subscriber configuration Auth. Default Call waiting protection #*84-0/1# 0: Off 1: On Configuration M,C,S off/ Fax, Modem on Call protection #*83-0/1# 0: Off 1: On M,C,S all off Intrusion protection #*85-0/1# 0: Off 1: On M,C,S off/ Fax, Modem on Automatic external line #*81-0/1# 0: Off 1: On M,C,S off Automatic dialling #*86-0/1# 0: Off 1: On M,C,S off Automatic dialling, setup #*69 rrr..# rrr: destination call no. M,C,S Terminal (TE) lock/free #*77 (pp..
Look up Authorizations Function Code Configuration x: Authorization 1=internal 2=incoming 3=Area 4=national 5=international 6=unlimmited Auth. Default M,C,S Ausland Set up external line authorization #*402 xnn..# External line call with PIN #94 nnpp..*rrr.. nn: subscriber pp: PIN rrr: destination call no. Master/Company Authorisation (the own authorisation you can‘t delete) #*401 xnn..# x: setup authorization level M,C 1=subscr. 6=Company 9=PABX nn: subscr. call no.
Look up Telephony Function Call up of centralized speed dial Code Configuration #100..299 Auth. Default M,C,S External line call on a bus line #90 rrr.. rrr: destination call no. External line call with PIN #94 nnp..*rrr.. nn: own subscr. call no. p: PIN rrr: destination call no. Pick up answering machine #5 nn nn: am-no. (00=search) Intrusion #06 Code call 1, 2, 3 or 4 #01..
Look up Call forwarding Function Code Configuration Call forwarding in central office: if line busy (CFB) after a time period (CFNR) permanent (CFU) #62 p(m)adrrr..# #63 p(m)adrrr..# #61 p(m)adrrr..# Follow me #*65 nn# nn: subscriber on M,C,S Follow me #*66 nn# nn: subscriber off M,C,S Call forwarding switch on-/off #*60 u-0/1# call forwarding if line busy (CFB) no reply (CFNR) unconditional (CFU) #*62 nn/rrr...# #*63 ttt nn/rrr...# #*61 nn/rrr...# nn: internal destination call no.
Look up Charges Function Code Configuration Auth. Default Printing of connection charges #*410-0/1nn..# 0: Off 1: On nn: subscr. call no. M,C all off Printing of incoming calls #*411-0/1nn..# 0: Off 1: On nn: subscr. call no. M,C all off Printing of incoming connections #*412-0/1nn..# 0: Off 1: On nn: subscr. call no.
Look up Door intercommunication system (DIS) Function Code Configuration Switch on DIS call forwarding Switch off DIS call forwarding #*439 p nn/rrr..# #*439 p 0# Set DIS call time Switch off DIS call time #*435 pttt# #*435 p# Clear / add subscriber DIS-AVA #*430-0/1pann..# 0: p: a: nn: subscr. call no. (input of several no. increments port automatically) #*043 pnn..# p: DIS-Port (1/2) nn: subscr. call no.
Look up Control contacts Configuration Auth. Activation delay #*057 ttt# ttt: Delay time in seconds (000..255) M 60 Set activation time of actors for alarm #*055 attt# a: actor (1/2) ttt: Time 000=permanent 001..255=´sec. M 0 Remote switching of actor 2pp..*IP pp: Remote switch PIN IP: internal procedure: #*059...
Look up Short description of PABX settings PABX call no: #*021 ISDN-Port X* PABX no. # (1..4) (0..4) ringing rhythm Analogue int. call no.: #*041 ab-Port int.call no. # (1..8) Digital int. call no.: (11..99) #*042 ab-Port int.call-no. # (1..8) Call distribution: (11..99) #*0221 ISDN-Port 0 AVA (1..4) Time: #*027 ISDN-Port 0 day #*024 ISDN-Port 0 day #*026 ISDN-Port 0 day day/night AVA # (0/1) #*025 ISDN-Port 0 day (0/1) (000..120) day/night AVA # (1..7,S) (1..4) (1..
Write down everything important Call distributions and call forwarding This sheet must be filled in separately for each multiple subscriber number and / or each PABX connection. It is recommended that this sheet is photocopied before filling it in. multiple subscriber no. or PABX call no. of external S0 port Call number MSN index 0..7 Port a/b a/b 1 a/b 2 a/b 3 a/b 4 a/b 5 a/b 6 a/b 7 a/b 8 Port S01 subscr. 1 subscr. 2 subscr. 3 subscr. 4 subscr. 5 subscr. 6 subscr. 7 Port S02 subscr. 1 subscr. 2 subscr.
Write down everything important Speed dial numbers Speed dial no. 6 At the end 90 Call number / name Speed dial no.
Write down everything important Programming the speed dialling numbers: #* Speed dial memory telephone no. # Clearing speed dial numbers: #* Speed dial memory # Speed dial no. Call number / name At the end Call number / name 6 Speed dial no.
Write down everything important Barring numbers, Free numbers, Emergency numbers Barring numbers Programming barring numbers: #*442 Barring no. memory Barring no. Barring no. # Barring number Barring no. memory Barring number memory Free numbers Programming Free numbers: #*441 Free no. memory Free no. Free number # Free number memory Free no. Free number memory Emergency numbers Programming Emergency numbers: #*440 Emergency no. memory Emerg. no.
Index A Actors 43 Alarm call 40 periodical for own telephone 40 periodical, clearing 41 single for other telephones 42 for own telephone 40 Analogue telephone pulse dialling use 9 tone dialling use 10 Troubleshooting 9 display incoming call no.
Index 6 Call diversion 59 no reply 31, 32 on busy 29 switched from extern. telephone 28 unconditional 27 unconditional from remote 28 Call forwarding 84 door calls 39 multiple subscriber connection 34 switch off 35 switch on 34 PABX connection 33 switch off 35 switch on 33 per subscriber 36 Call forwarding ISDN 33 Call number transfer 82 Call protection 59 Call waiting accept, conclude first conv. 17 accept, hold first conv.
Index operating from internal operation from external Conversation external via speed dial 12 internal 12 intrusion 23 via private call 13 via project number 13 with PIN 13 without LCR 15 43 43 D Data sets store 68 Device type determine call shall adress 15 DIS 38 DIS ports 38 Door call 38 Door intercommunication system 38, 86 Door opening 38 Dual tone multiple frequency 10 E External line multiple subscriber connection PABX connection 14 reserving 22 selecting purposeful 14 F First aid 78 Follow me
Index ISDN call forwarding 33 ISDN telephones 8 K L Keys # and * 8 M Malicious calls 46 Mistakes 78 Monitor noise 44 MSN engaged 61 MSN busy switching off 61 MSN busy switching on 61 MST module 43 Multiple subscriber connection transmit telephone no.
Index for control contacts for external calls of virtual subscriber setting 55 setting to default 43 13 43 55 Print S R key 8 Receive a call transmit telephone no. Recycling 78 Reserving external line 22 Reset to basic settings 78 Room surveillance end 44 making 44 preparing 44 56 Seizure of external line mulitiple subscriber connection PABX connection 14 Service to be forwarded 33 Short description settings of multiple subscr.
Index Speed dial number assign 54 delete 54 Speed dialling number Standard Flash 9 Storage of call data 67 Stored call data printing/clearing Structure of individual pages of user manual Subscriber configuration Surveillance of a room T 6 At the end U V 98 54 70 7 6 81 44 Take over call 18 Tariff 68 Tariff outgoing calls 65 Telephone differences 8 Telephone locking 49 Telephone number suppression 56 Telephones analogue telephones 9 ISDN telephones 8 Telephony 83 Three party call 19 in the central offi
Tones Intrusion tone Someone intrudes on your conversation. Central office dialling tone Special dialling tone, internal One or more of the following functions are switched on: Follow me, Call transfer, Silent signalling, Automatic dialling Tone to indicate free line Internal dialling tone Line busy tone Negative acknowledge tone wrong input/function not possibile Special dialling tone, external Instead of central office dialling tone, if an ISDN call forwarding is activated.
Important notes, short overview Analogue telephone set Lift the receiver of your telephone set and enter a telephone number. If you hear tones or a crackling noise during the dialling process, you have an analogue telephone set. Also refer to ”Pulse dialling” and ”Tone dialling”. ISDN telephone set Lift the receiver of your telephone set and enter a telephone number. If you neither hear tones nor a crackling noise during the dialling process, you have an ISDN telephone set.
R Short user instructions (selection) To call someone with autom. connection Internal call + * Call no. + Call no. + Call no. + 0 Call no. + # speed dial no. + # speed dial no. + #95 project no. Call no. + #99 Call no. + #94Call no. PIN * Call no. External call via speed dialling Project call Private call Call with PIN without autom.
If engaged Intrusion -+ -+ Being available everywhere Destination Call completion on busy #00 #06 ON OFF #*65Call no.# #*66Call no.# Follow Me Call forwarding on busy #*61Call no.# #*6011# #*62Call no.# #*6021# #*6020# Call forwarding on no reply #*63Call no.# #*6031# #*6030# #*6001# #*6000# Call forwarding unconditionally Call forwarding, all modes #*6010# Programming an alarm call ON single #*59hh mm# periodic #*57hh mm# #*58days# for other telephones #*421hh mm Call no.
