User manual

82
5
Changing basic settings
Programming of call signalling
Your EURACOM P4 is capable of indicating an incoming call in different ways. It is
therefore possible to program a ring delay for each of the MSNs each with its own
ringing rhythm and also speed of the tone sequence. You can further assign a name
to the telephone number. In this case an incoming call additionally will be displayed
with the name of the subscriber. You have to program all corresponding settings in
the menu “call signalling”. And this is how you get to the menu “call signalling”:
PP EURACOM P4 in Idle mode. Press
Programming key twice.
2 Press key 2. You are now in menu
“subscriber config.”.
2 Press key 2. You are now in menu “call
signalling”
+/- If necessary, press the Plus or Minus key
until the desired menu point is shown.
eg
2 Press Number key of the menu point. This
is how you call up the respective menu.
Note:
You are also able to call up a menu point
directly via the respective number. This is
archieved without it being shown first in
the display thanks to the use of the Plus or
Minus key.
PROGRAMMING
0:END )
1:MAIN SETTINGS (
y
SUBSCRIBER CONFIG.
0:END 1:SUBSCR. TYPE )
2:CALL SIGNALLING (
y
SUBSCRIBER CONFIG.
CALL SIGNALLING
0:END )(
y
SUBSCRIBER CONFIG.
CALL SIGNALLING
0:END )(
y
SUBSCRIBER CONFIG.
CALL SIGNALLING
2:RINGER SIGNALLING )(
y