Owner manual

A Fusion of the Art and Science of Light
© 2010 Architectural Cathode Lighting, Inc.
Architectural Cathode Lighting, Incorporated
ACL INC.
c a t h o d e l i g h t i n g . c o m
5 3 0 1 P a c i f i c B o u l e v a r d
Huntington Park California 90255 USA
Telephone [phone]
Fax [phone]
i n f o @ c a t h o d e l i g h t i n g . c o m
DETAILS
C A T H O D E T 5 0
Product
(1) For a 1 lamp standard ballast system see B100. For a 2 lamp high output ballast system see B200.
(2) For multiple selections place a comma after each selection.
Standard Output
Cold Cathode System
(Add DB for Double Back)
T50
_ _ _ _ _ _
S01
(2)
DI - Dim
ND - Non Dim
S - Surface
Standard Color (s) Dim-able MountPrimaryEnvironment
120V
277V -Special
Order
Note: For a variation (custom) of this product contact ACL to request a variation number and information.
S P E C I F I C A T I O N C O D E :
DR - Dry
DP - Damp
WT - Wet (DB only)
See Chart
(1)
S01
Project Name
Linear FeetDate
S
NTS
Single Row Closed Loop
C A T H O D E T 5 0 P R O D U C T D E T A I L S :
date: April 6, 2010 file: T50details.pdf page: 1 of 3
T50 is a low material cost, energy efficient cold cathode
lighting system. When comparing the data it out performs LED.
•228 Lumens per foot (compared to 82 LED)
•54.65 Lumens per watt (compared to 21.57 LED)
•Approx. 4 - 5 watts per foot
•Over 30 bright colors (compared to 8 LED)
•Full Range Dimming
•50,000 Hour Lamp Life
A. Transformer
B. Lamp
C. Intermediate
Lampholder
D. Feed Lampholder
E. GTO-15 in Conduit
F. Cove
G. Upper Ceiling
H. Lower Ceiling
I. Lamp Support
F
G
B
I
C
Notes: For Double Back (DB) condition,
see page 3.
D
E
A
H
System Requirements
1. Secondary feeds must be equal in length and not exceed 20’
2. Only one single GTO-15 conductor for each conduit feed
3. Maximum length of lamp is 94”
4. Lamp lengths shall be standardized when ever possible
5. Transformer installed in accessable and vented area(s)
6. Sound rating approximately 33 decibels
7. Include detail(s) when possible
Additional rows of lamps can be specified
in whites or separate colors.
T50 Specifications
60mA Secondary
(1) For 277V and HPF contact ACL.
(2) Use VA for computing loads. Use Watts for computing power consumption.
X
Y
Z
4.625”
17.625”
8.0”
Z
Y
X
Watts VA(2) AMPS Sec.V
292 540 4.5 9000
243 450 3.75 7500
162 300 2.5 5000
DR
120V
DI