User's Manual

22 TWACS
®
- ORION
®
for CENTRON
®
Meter User Guide
Troubleshooting and Error Messages
Troubleshooting and Error Messages
When necessary, the HHTR can run a self-diagnostics test. If there is a
problem, it will respond with an appropriate error code.
For RF communication, and HHTR or user error codes, refer to HHTR
Displayed Error Codes on page 26.
For more information about Trouble Server Applications, refer to the
Trouble Server Applications chapter in the TNS documentation
Troubleshooting Scenarios
There are two basic types of troubleshooting scenarios:
• Configuration/Installation Status
• Field Troubleshooting
Configuration/Installation Status
You can view additional information about configuration and link status by
selecting Com Stat from the ORION Menu screen. Although this
information is read from the EMTR, check the RF Link Data: Acq Log
(refer to step 16. of this procedure) to verify recent successful
ORION/EMTR communication.
Complete the following steps to view configuration and link status data.
1. Press the On/Off button on the HHTR. The “flash” screen appears
momentarily displaying the software version number. Firmware
Vn.n
is replaced with the firmware version number installed in your
HHTR.
The Main Menu screen appears.
DCSI: HHTR
Y72160-1
Www.twacs.com
Firmware Vn.n
Main Menu
Order
Serial Com
REMOTE
EMTR
TWACS
HHTR Config