User's Manual

DRAFT
22 TWACS
®
- ORION
®
for CENTRON
®
Meter User Guide
ORION and EMTR-2 Communication Setup
10. Press any key and the following screen displays.
11. Press the Esc button to return to the ORION Menu.
If you receive a message from the Error Codes list, press the Esc
button, then repeat steps 5-9. Refer to HHTR-LP Displayed Error
Codes on page 32 for error code description and resolution.
N OTE Your previously selected options will appear on the screens when you
repeat steps 5-9. Make new selections or entries, or press the Enter
button to accept each correct entry.
Confirm ORION Installation
You may confirm that the ORION transmitter was successfully installed by
performing a Remote List query.
No ORION Data Received During the Install
If you receive the following message after step 9. of the Install
procedure...
Orion Install Menu
EMTR trying Orn. Acq.
EMTR S/N 123456
Orion S/N 123456
Orion Install Menu
EMTR checking EnrTbl
EMTR S/N 123456
Orion S/N 123456
Orion Install Menu
Success!
EMTR S/N 123456
Orion S/N 123456
Orion Install Menu
Success!
Reading: 01234567890
RSSI: 255
Orion Install Menu
SSI=0 Esc:OK Ent:Rpt
EMTR S/N 123456
Orion S/N 123456