User's Manual

26 TWACS
®
-ORION
®
for UMT Products User Guide
EMTR3 Menu
2. To begin installation, press Enter on an IED where the Port column is blank
or where the Port column displays an “I”. A blank Port column means the
IED has not been installed. An “I” in the Port column means the HHTR-3
has a record indicating it has already installed that IED on another EMTR-3.
3. Enter a port number using the keypad, and then press Enter to accept.
a In the event the Port you’ve chosen is already occupied, you’ll see
the Port In Use Warning.
b Press ESC to return to the Port Number screen or press Enter to
overwrite the port assignment and view the Service Type menu.
4. Use the navigation keys to select the correct Service Type, and press the
Enter key to view the Install screen.
EMTR: ssssssssss
IED: ssssssssss
Enter Port Number_
Enter to Accept
Warn: Port In Use by
IED: ssssssssss
Continue Install?
ESC: NO, Enter: Yes
IED: ssssssssss
Enter Service Type
Water
Propane
Nat Gas
Other
Installing
IED: ssssssssss
Please Wait...
DRAFT