User's Manual

28 TWACS
®
-ORION
®
for UMT Products User Guide
EMTR3 Menu
6. When the list first displays, the cursor highlights the first item on the list.
Press the down arrow key to move the cursor through the list. For more
information, see Listening list & port list column headings and list item
values on page 24.
N OTE When you reach the third list item, you can push the down arrrow again to
view any items below it, but the cursor stays at the bottom of the display
while the entire display shifts down.
Port List Installation Setup
When you press the Enter key on an empty port (no IED serial number for the
selected port) in the Port List, the installation process begins. The Select IED S/N
screen allows you to manually enter the desired IED serial number for installation.
If that serial number is already located on another port, the Duplicate Detected
Error screen displays. If the serial number is not already located on another port,
you will be promped to select a service type.
N OTE When entering an ORION gas or water IED serial number for installation, if the
serial number is less than than 79,999,999, drop the first digit, “7”, and enter
the seven remaining digits. For all ORION gas and water IEDS with serial
numbers equal to or greater than 80,000,000, enter all digits of the IED, which
will be from 8 to 10 digits.
Use the following procedure to install an IED using Manage Port List.
1. Follow the steps in Manage Port List on page 27 to view the Port List.
2. Press Enter on an empty port to view the Select IED S/N screen.
IED xx/xx P SR
Empty X
Empty X
Empty X
EMTR: ssssssssss
Enter Serial Number
IED S/N__________
Enter to Accept
DRAFT