User's Manual

40 TWACS
®
-ORION
®
for UMT Products User Guide
PC Upload Menu
PC Upload Menu
The HHTR-3 maintains a database of the actions performed by the HHTR-3 for
every installaton, removal, and replacement of an Intelligent End Device (IED). It
also records any IEDs detected by an EMTR-3 during a designated listening mode.
All these records are maintained in an internal database. The HHTR-3 informs the
user when this database becomes full and allows the user to upload the existing
records prior to overwriting them.
The HHTR-3 has the capability to upload the database to a personal computer (PC)
that has the HHTR-PC application running on it. In addition to having the
HHTR-PC application installed on the destination PC, the upload process requires
the HHTR-3 to be connected to the PC via a special RS-232 serial data cable. For
more information on the HHTR-PC application see the HHTR-PC Application
Help.
To use the PC Upload feature of the HHTR-3, the HHTR-3 must be connected to a
PC with the HHTR-PC application installed on it. The following procedure
explains how to navigate the PC Upload screens.
1. From the Main Menu of the HHTR-3, use the navigation keys to place the
cursor to the left of PC Upload.
2. Press the Enter key to view the PC Upload screen.
N OTE It is possible for this screen to time out. If this happens, press Enter to return
to the Main Menu, select PC Upload, and press Enter to start the PC Upload
again.
3. Start the HHTR-PC application if it isn’t running on the PC.
Main Menu
EMTR-3
TWACS
HHTR Config
Serial Com
PC Upload
PC Upload
Waiting for PC to
initiate upload.
Please wait...
DRAFT