User's Manual

TWACS
®
-ORION
®
for UMT Products User Guide 21
Chapter 2 • Functional Description
Turning On the HHTR-3
1. Press the On/Off button on the HHTR-3 keypad to turn on the HHTR-3 and
view the Splash Screen.
The Splash screen appears momentarily displaying the software version
number. Firmware Y.y is replaced with the firmware version number
installed in the HHTR-3.
The Main Menu screen appears.
N OTE If an HHTR-3 serial number has not been entered, the Initialization Menu will
display as shown below. Enter the serial number found under the barcode on
the back of the HHTR-3.
2. Use the Left (7), Right (9), Up (8), and Down (0) keys to move the cursor to
a desired selection on the Main Menu.
DCSI: HHTR
Yxxxxx-xxx
Firmware Y.y
www.twacs. com
Main Menu
TWACS
HHTR Config
Serial Com
PC UploadEMTR-3
(Check back of HHTR)
Please Enter the
HHTR S/N________
Enter to Accept
Main Menu
EMTR-3
TWACS
HHTR Config
Serial Com
PC Upload