User's Manual

68 TWACS
®
-ORION
®
for UMT Products User Guide
Electrical Specifications
Compliance Specifications
N OTE ANSI C12.1-3001 is the referring standard for tests listed in tables 3.2, 3.3, and
3.4.
N OTE Per Measurement Canada, Specifications/Standards LMG-EG-07 & PS-E-09-E
are used to verify compliance with Canadian criteria.
Table 4.2 Compliance specifications
Device(s) Test Title Applicable Specification
HHTR-3
and
EMTR-3
EMI/RFI Emission
conducted/radiated
ANSI C12.1-3001 Test No. 27- “Radio
Frequency Conducted and Radiated Emissions”
per CFR 47 Part 15, Class A and B. (See also
ANSI C63.4)
HHTR-3
and
EMTR-3
EMI/RFI Susceptibility ANSI C12.1-3001 Test No. 26- “Effect of Radio
Frequency Interference”
EMTR-3 AC line surge ANSI C12.1-3001/IEEE C62.41-1991 Test No.
17- “Effect of High Voltage Line Surges”
EMTR-3 Electrical fast transient ANSI C12.1-3001 Test No. 25- “Electrical Fast
Transient/Burst” (Testing at 100 and 400 KHz is
required) IEC 801-4: 1988
EMTR-3 Surge withstand
capability FT and OSC
ANSI/IEEE C.37.90.1 - 2002
EMTR-3 High voltage isolation on
meter chassis
ANSI C12.1-3001 Test No. 15- “Insulation”
EMTR-3 Voltage interruption test ANSI C12.1-3001 Test No. 16- “Voltage
Interruption”
HHTR-3
and
EMTR-3
Effect of electrostatic
discharge
ANSI C12.1-3001 Test No. 28- “Effect of
Electric Discharge (ESD)”
EMTR-3 Effect of Variation of
Frequency
ANSI C12.1-3001. Test #6
EMTR-3 Effect of Variation of
Voltage on the Metering
Device
ANSI C12.1-3001. Test #5.
HHTR-3
and
EMTR-3
Occupied Bandwidth 200 kHz. The ORION equipment transmits at
100 kilobits/second. The HHTR transmits at
9600 bits per second, but uses a wider frequency
deviation so that the occupied bandwidth is still
in the 200 kHz range.
HHTR-3
and
EMTR-3
RF Output Power FCC 15.249 compliant. IC RSS-210 A2.9; 2005
compliant.
HHTR-3
and
EMTR-3
Design Frequency
Accuracy
+/- 50 parts per million.