Installation Instructions

MTU Instruction
for American Model AL800-AL5000 Gas Meters
Step 12 – Continue here to mount the
MTU to the pulser using the adaptor
provided. Begin by positioning the
adaptor on the back (or front) of the
pulser body and attach it using the two
#8-18 x ½” Phillips pan head thread
forming screws provided, as shown
below.
Step 13 – Bundle the excess wire into the
compartment on the adaptor.
Step 14 - Mount the MTU to the adaptor
using the two ¼-20 x 1-½” Phillips pan
head machine screws and the ¼-20
nylock nuts.
Page 111