Installation Instructions
Table Of Contents
- Table of Contents
- 471-2000.pdf
- 471-2001.pdf
- 471-2002.pdf
- 471-2003.pdf
- 471-2004.pdf
- 471-2005.pdf
- 471-2006.pdf
- 471-2007.pdf
- 471-2008.pdf
- 471-2009.pdf
- 471-2010.pdf
- 471-2011.pdf
- 471-2012.pdf
- 471-2013.pdf
- 471-2014.pdf
- 471-2015.pdf
- 471-2016.pdf
- 471-2017.pdf
- 471-2018.pdf
- 471-2019.pdf
- 471-2020.pdf
- 471-2021.pdf
- 471-2022.pdf
- 471-2023.pdf
- 471-2026.pdf
- 471-2027.pdf
- 471-2028.pdf
- 471-2029.pdf
- 471-2030.pdf
- 471-2031.pdf
- 471-2032.pdf
- 471-2033.pdf
- 471-2034.pdf
- 471-2035.pdf
- 471-2036.pdf
- 471-2037.pdf
- 471-2038.pdf
- 471-2040.pdf
- 471-2041.pdf
- 471-2042.pdf
- 471-2043.pdf
- 471-2044.pdf
- 471-2045.pdf
- 471-2046.pdf
- 471-2047.pdf
- 471-2051.pdf
- 471-2052.pdf
- 471-2053.pdf
- 471-2054.pdf
MTU Instruction
for Landis & Gyr S4 MTU/Electric Meter Assembly
Purpose & Scope
This instruction provides a procedure for installing Landis & Gyr S4 MTU/Electric Meter
Assemblies.
WARNING!
Be sure to follow all applicable electrical codes, standards and safety
procedures during all phases of operation, service and repair of this device.
Any work on energized meters and meter sockets presents a danger of
electrical shock. Meter socket terminals carry the full incoming service
voltage. Touching these terminals may result in death or serious injury.
The information contained in this document is intended to be an aid to
qualified metering personnel. It is not intended to replace the extensive
training necessary to handle metering equipment in a safe manner.
Supplies and Tools Required
Physical Installation of the Landis & Gyr
S4 MTU/Electric Meter Assemblies into
compatible meter sockets can be
accomplished without the use of tools.
Testing of the meter socket, however,
may require specialized equipment.
Check with the local electric utility for
required testing procedures.
471-2041 – 2/13/2007
Page 169