Installation Instructions
Table Of Contents
- Table of Contents
- 471-2000.pdf
- 471-2001.pdf
- 471-2002.pdf
- 471-2003.pdf
- 471-2004.pdf
- 471-2005.pdf
- 471-2006.pdf
- 471-2007.pdf
- 471-2008.pdf
- Purpose & Scope
- Parts Required
- Tools Required
- Introduction
- Connecting Voltage Sensing (Type P) Inputs
- Typical Furnace Application
- Connecting Temperature Sensing (Type T) Inputs
- Typical Hot Water Heater Application
- Typical Burner/Fireplace Application
- Programming
- STAR Programming Software โ Main Menu Choices
- 471-2009.pdf
- 471-2010.pdf
- 471-2011.pdf
- 471-2012.pdf
- 471-2013.pdf
- 471-2014.pdf
- 471-2015.pdf
- 471-2016.pdf
- 471-2017.pdf
- 471-2018.pdf
- 471-2019.pdf
- 471-2020.pdf
- 471-2021.pdf
- 471-2022.pdf
- 471-2023.pdf
- 471-2026.pdf
- 471-2027.pdf
- 471-2028.pdf
- 471-2029.pdf
- 471-2030.pdf
- 471-2031.pdf
- 471-2032.pdf
- 471-2033.pdf
- 471-2034.pdf
- 471-2035.pdf
- 471-2036.pdf
- 471-2037.pdf
- 471-2038.pdf
- 471-2040.pdf
- 471-2041.pdf
- 471-2042.pdf
- 471-2043.pdf
- 471-2044.pdf
- 471-2045.pdf
- 471-2046.pdf
- 471-2047.pdf
- 471-2051.pdf
- 471-2052.pdf
- 471-2053.pdf
- 471-2054.pdf
MTU Instructions
General Installation and Wiring Guidelines
Purpose & Scope
This instruction outlines general practices and procedures for the installation and wiring of
standalone, electronic interface Hexagram STAR MTUs. When installing an MTU,
always refer to these instructions in addition to
any specific instructions for the
meter/MTU combination you will be installing and programming.
Note: STAR MTUs are shipped to the customer in sealed enclosures and have passed
extensive testing and calibration procedures at the factory. No additional calibration or
adjustment is required, or can be made, without breaking the๎factory seal. As calibrated,
these devices radiate a tiny fraction of the power allowable by๎
FCC Radio Frequency
Exposure Limits 47 CFA CH 1.1310. There are no radio-frequency safety issues relating
to the use of this product based on this regulation.
471-2000 - 7/25/2007
Page 3