Installation Instructions
Table Of Contents
- Table of Contents
- 471-2000.pdf
- 471-2001.pdf
- 471-2002.pdf
- 471-2003.pdf
- 471-2004.pdf
- 471-2005.pdf
- 471-2006.pdf
- 471-2007.pdf
- 471-2008.pdf
- 471-2009.pdf
- 471-2010.pdf
- 471-2011.pdf
- 471-2012.pdf
- 471-2013.pdf
- 471-2014.pdf
- 471-2015.pdf
- 471-2016.pdf
- 471-2017.pdf
- 471-2018.pdf
- 471-2019.pdf
- 471-2020.pdf
- 471-2021.pdf
- 471-2022.pdf
- 471-2023.pdf
- 471-2026.pdf
- 471-2027.pdf
- 471-2028.pdf
- 471-2029.pdf
- 471-2030.pdf
- 471-2031.pdf
- 471-2032.pdf
- 471-2033.pdf
- 471-2034.pdf
- 471-2035.pdf
- 471-2036.pdf
- 471-2037.pdf
- 471-2038.pdf
- 471-2040.pdf
- 471-2041.pdf
- 471-2042.pdf
- 471-2043.pdf
- 471-2044.pdf
- 471-2045.pdf
- 471-2046.pdf
- 471-2047.pdf
- 471-2051.pdf
- 471-2052.pdf
- 471-2053.pdf
- 471-2054.pdf
MTU Instruction
for AMCO and ABB Water Meters
b. Water Meter with Integral Cable - If
the water meter is supplied with an
integral cable and a cable-to-cable
splice is necessary, use a gel-filled
wire splice designed for outdoor
(moisture applications) to seal the
individual connections.
Note: When connecting a dual port MTU
to a compound meter, connect port 1
(black jacket) to the primary, or high-flow
register and port 2 (grey jacket) to the
secondary or low-flow register.
RS Pulser
MTU Cable RS Pulser Register
Red R (Red)
Black B (Black)
White B (Black)
No Connection G (Green)
Type A Industrial Pulser
MTU Cable
Type A Industrial
Pulser Register
Red
+ Positive
Black
- Negative
White
- Negative
AMCO Digital Register
MTU Cable
AMCO Digital
Register
Red R (Red)
Black B (Black)
White B (Black)
No Connection G (Green)
Page 52