User's Manual

MTU Instruction
for Carson Industries 1015-5 Pit Lids
Step 3 – Thread plastic zip ties through
each of the drilled rib holes and through
the holes of the MTU mounting tabs.
Step 4 – Gently pull through the zip ties
so that the MTU is secured to the pit lid.
Do not over tighten the zip ties.
Excessive torque may bend the
mounting tabs and break the seal of
the MTU. There should be a little
movement with the MTU once the zip ties
have been sufficiently tightened.
Step 5 – Once secured, remove the
unnecessary length from the zip tie ends.
Page 177