PS6X PRICE COMPUTING SCALE USER MANUAL
Important Safety Information 1) Please read these safety instructions carefully. 2) Keep this user manual for later reference. 3) This product meets the relative requirements of the national standard IEC 60950: 2001 ‘Safety of information technical equipment’. 4) Thunder can hurt this product and even your personal safety, so please pull out the network cable and other conductor connecting external attachment in thunder days.
CONTENT Unique Functions ................................................................................................................... 1 Excellent Functions ............................................................................................................... 1 Accessories .............................................................................................................................. 1 Technical Specification ......................................................................
Unique Functions Unique super power-saving design, 3 pieces of D batteries support 2-year working (working condition: 8 hours/day, 30 times/hour, 10 seconds/weighing). Unique multi-customer accumulating function (patent), enables simultaneous service for 5 customers. Powerful function makes one scale used as five scales. Insect-proof design (patent) prevents insect’s entrance, effectively reducing 80% scale failure rate.
Technical Specification Module PS6XB Basic Features With backlight Accuracy Class Weighing Capacity (Max.) 15lb/30lb; 30lb/60lb Verification Scale Interval 0.005lb/0.01lb; 0.01lb/0.02lb Weighing Capacity (Min.) 0.1lb; 0.2lb Tare (Max.) -9.995lb; -29.99lb Power Supply 3 pcs D batteries Battery Estimated Use Time Approximate 2 years (8 hours/day, 30 times/hour, 10 seconds/weighing) Power Consumption Soft shutdown < 5μA, Stand by: 21μA, Working: 4.6mA, Backlight on: <5.
Appearance and Dimension Pole Type (Unit: mm): Bench Type (Unit: mm): 3
The Installation of Customer Display Display Pole Fix Set Screw Back Cover Front Cover 1. Take out the fix set，open the LCD cover and loose the four screws of display pole. FFC 2. Take out the FFC. 3. Insert the FFC cable through the display pole as the arrow shows. 4. Fix the display pole on the scale platter.
5. Tighten the four screws. Fix Set of Display Pole “A” Side of Fix Set (down) 6. As shown, put on the fix set (“A" side down). 8. Open the FFC socket lock, plug and lock the FFC cable. (Note: Keep blue side upper). 7. Remove the tape circled in the picture and stick it aside.
Insert “A” column into hole “B” A B 9. Fix the FFC with the tape. 10. Fix the front cover (with LCD) on display pole. Insert the FFC through the pole, straighten the cable then fixing. 11. Assemble the display as shown in above pictures. Attention: after putting on the fix set, lift the display slightly to ensure that the display firmly fixed on the display pole. 12. Put on the fix set. The whole installation is finished.
Operation 7.1 Function Keys Operation Keys Functions 1) Press and hold this key for 2.5 seconds to turn on/off the scale. 2) Press to clear error data input or to exit. (Note: please keep scale tray empty during scale startup.) 1) 2) - Press and hold this key for 2.5 seconds to enter Set Mode. Press to exit any setting or operation steps. C1-C5: Customer1 to Customer5, used for sales pending orders, accumulation and record of 5 customers. See 7.2.5 Pending order & Accumulation Function.
7.2 Further Functions Explanation 7.2.1 Diagram of Basic Operation Process Put the commodity on the tray. Input unit price via the numeric keys. Press numeric key + [PLU] The screen will display the unit price, total price, etc. Press [CHG] key Input the amount received (it must be greater than the subtotal amount) Press [CHG] key Note: 1. Please make sure the scale is on a flat and stable surface before using. 2. Please keep scale tray empty during startup. 7.2.
7.2.3 Give Change Function ① After weighting, the display will show the total price; ② Press [CHG] key to enter Give Change function; ③ Input the amount received; ④ Press [CHG] key to give change. Note: Give Change function is not allowed if the paying amount is less than total. Press [C/ESC] key to exit this function. 7.2.4 Tare Function ① Put the container or wrapper on the scale tray; ② Press [Tare] key to enter weight-deducting status; ③ Put the item into the container or wrapper.
Customer 1 0．055 kg 1 1 C1’s first commodity weight 12.00 C1’s first commodity price 25.50 C1’s total price of the first order First record 7.2.6 Sleep Mode Function Sleep Mode Function aims to set the scale to lower-power state by setting the time of “non-operating”. The scale will wake up by any loading or key touching. ① Press [MC/Set] key to enter the Set mode during the countdown of power on; ② Input the time of non-operating and press [MC/Set] key to confirm; ③ Press [C/ESC] key to exit.
Contact Us Customer satisfaction is our top priority. Therefore, please don't hesitate to contact us if you have any question or suggestion. It's our honor to offer the best solution and attention for you. You can contact us as following ways: Website: www.aclas.tw Email: osa@aclas.com Facebook: @Pinnacle Aclas Twitter: @ArmPos We will response within one business day.
DPS601USV0A
