ASSEMBLY INSTRUCTIONS MODEL: 02043 PAGE 1 OF 7 NOTE: THIS ITEM NOT RECOMMENDED FOR COMMERCIAL USE KEEP THIS DOCUMENT FOR REFERENCE IN CASE PARTS ARE NEEDED DO NOT TIGHTEN SCREWS UNTIL COMPLETELY ASSEMBLED!! BED PARTS № HARDWARE PARTS DESCRIPTION A B C Ladder Main Post D1 QTY № DESCRIPTION QTY 2 PCS 1 1/4” x 65mm 8 PCS 2 PCS 2 1/4”X 60mm 16 PCS 2 PCS 3 1/4”X 45mm 9 PCS 2 PCS 4 1/4”X 15mm 12 PCS 2 PCS 5 5/16”x 40 4 PCS 2 PCS 6 1/4” locked Nut 8 PCS 2 PCS 7 Curved Washer
ASSEMBLY INSTRUCTIONS MODEL: 02043 PAGE 2 OF 7 NOTE: THIS ITEM NOT RECOMMENDED FOR COMMERCIAL USE KEEP THIS DOCUMENT FOR REFERENCE IN CASE PARTS ARE NEEDED DO NOT TIGHTEN SCREWS UNTIL COMPLETELY ASSEMBLED!! P Support Leg 4 PCS 17 Plastic Plug 18 Fixed Sheet Metal 88 PCS 1 PC Size of Mattress This bed is designed to use a mattress 74” x 37-1/2” – 38-1/2” on the upper bunk and 74” x 53-1/2” – 54” on the lower bunk. The thickness of the mattress must not exceed 6” on the upper bunk.
ASSEMBLY INSTRUCTIONS MODEL: 02043 PAGE 3 OF 7 NOTE: THIS ITEM NOT RECOMMENDED FOR COMMERCIAL USE KEEP THIS DOCUMENT FOR REFERENCE IN CASE PARTS ARE NEEDED DO NOT TIGHTEN SCREWS UNTIL COMPLETELY ASSEMBLED!! SAFETY WARNINGS ( 16 CFR 1513) (1) Do not allow children under 6 years of age to use the upper bunk. (2) Use guardrails on both sides of the upper bunk. (3) Prohibit horseplay on or under beds. (4) Prohibit more than one person on upper bunk. (5) Use ladder for entering or leaving upper bunk.
ASSEMBLY INSTRUCTIONS MODEL: 02043 PAGE 4 OF 7 NOTE: THIS ITEM NOT RECOMMENDED FOR COMMERCIAL USE KEEP THIS DOCUMENT FOR REFERENCE IN CASE PARTS ARE NEEDED DO NOT TIGHTEN SCREWS UNTIL COMPLETELY ASSEMBLED!! STEP 5、6// STEP 7//
ASSEMBLY INSTRUCTIONS MODEL: 02043 PAGE 5 OF 7 NOTE: THIS ITEM NOT RECOMMENDED FOR COMMERCIAL USE KEEP THIS DOCUMENT FOR REFERENCE IN CASE PARTS ARE NEEDED DO NOT TIGHTEN SCREWS UNTIL COMPLETELY ASSEMBLED!! STEP 8、9// STEP 10//
ASSEMBLY INSTRUCTIONS MODEL: 02043 PAGE 6 OF 7 NOTE: THIS ITEM NOT RECOMMENDED FOR COMMERCIAL USE KEEP THIS DOCUMENT FOR REFERENCE IN CASE PARTS ARE NEEDED DO NOT TIGHTEN SCREWS UNTIL COMPLETELY ASSEMBLED!! STEP 11// STEP 12// STEP 13//
ASSEMBLY INSTRUCTIONS MODEL: 02043 PAGE 7 OF 7 NOTE: THIS ITEM NOT RECOMMENDED FOR COMMERCIAL USE KEEP THIS DOCUMENT FOR REFERENCE IN CASE PARTS ARE NEEDED DO NOT TIGHTEN SCREWS UNTIL COMPLETELY ASSEMBLED!! STEP 10// STEP 11// Remark: 1. Please always keep the warning lable on the inside of the upper bed end structure permanently. 2.
