Instructions / Assembly

ManualsBrandsAcme Furniture ManualsBed FramesTritan Twin Over Queen Metal Bunk Bed in Silver

ASSEMBLY INSTRUCTIONS

MODEL: 02052 PAGE 1 OF 4

NOTE: THIS ITEM NOT RECOMMENDED FOR COMMERCIAL USE

KEEP THIS DOCUMENT FOR REFERENCE IN CASE PARTS ARE NEEDED

DO NOT TIGHTEN SCREWS UNTIL COMPLETELY ASSEMBLED!!

BED PARTS

HARDWARE PARTS

№

DESCRIPTION

QTY

№

DESCRIPTION

QTY

Left Side Panel

1 PC

Hex-Head ￠1/4”*35mm Bolts

2 Pcs

Right Side Panel

1 PC

Hex-Head ￠1/4”*75mm Bolts

8 Pcs

Bottom Frame

1 PC

Hex-Head ￠1/4”*60mm Bolts

16 Pcs

Top Frame

1 PC

￠1/4” locked Nuts

10 Pcs

Guardrails

2 PCS

￠1/4”*20mm Nuts

8 Pcs

Supporting Leg

2 PCS

Curved Washers

24 Pcs

Metal Holder

2 PCS

Washers

12 Pcs

Allen Wrenches

1 Pc

Plastic pads

4 Pcs

Open wrench

1 Pc

Summary of content (4 pages)

PAGE 1
ASSEMBLY INSTRUCTIONS MODEL: 02052 PAGE 1 OF 4 NOTE: THIS ITEM NOT RECOMMENDED FOR COMMERCIAL USE KEEP THIS DOCUMENT FOR REFERENCE IN CASE PARTS ARE NEEDED DO NOT TIGHTEN SCREWS UNTIL COMPLETELY ASSEMBLED!! BED PARTS № DESCRIPTION A HARDWARE PARTS QTY № 1 PC 1 Hex-Head ￠1/4”*35mm Bolts 2 Pcs 1 PC 2 Hex-Head ￠1/4”*75mm Bolts 8 Pcs 1 PC 3 Hex-Head ￠1/4”*60mm Bolts 16 Pcs 1 PC 4 ￠1/4” locked Nuts 10 Pcs 2 PCS 5 ￠1/4”*20mm Nuts 8 Pcs 2 PCS 6 Curved Washers 24 Pcs 2 PCS 7 Washer
PAGE 2
ASSEMBLY INSTRUCTIONS MODEL: 02052 PAGE 2 OF 4 NOTE: THIS ITEM NOT RECOMMENDED FOR COMMERCIAL USE KEEP THIS DOCUMENT FOR REFERENCE IN CASE PARTS ARE NEEDED DO NOT TIGHTEN SCREWS UNTIL COMPLETELY ASSEMBLED!!
PAGE 3
ASSEMBLY INSTRUCTIONS MODEL: 02052 PAGE 3 OF 4 NOTE: THIS ITEM NOT RECOMMENDED FOR COMMERCIAL USE KEEP THIS DOCUMENT FOR REFERENCE IN CASE PARTS ARE NEEDED DO NOT TIGHTEN SCREWS UNTIL COMPLETELY ASSEMBLED!! Remark: 1. Please always keep the warning lable on the inside of the upper bed end structure permanently. 2.
PAGE 4
ASSEMBLY INSTRUCTIONS MODEL: 02052 PAGE 4 OF 4 NOTE: THIS ITEM NOT RECOMMENDED FOR COMMERCIAL USE KEEP THIS DOCUMENT FOR REFERENCE IN CASE PARTS ARE NEEDED DO NOT TIGHTEN SCREWS UNTIL COMPLETELY ASSEMBLED!! Size of Mattress This bed is designed to use a mattress 80” x 37-1/2” – 38-1/2” on the upper bunk and 80” x 59-1/2” – 60” on the lower bunk. The thickness of the mattress must not exceed 6” on the upper bunk.