User`s manual

26
GB
Trouble Shooting
Problem Possible causes What to do
The display on the front
panel does not light up.
Main cable is not
connected.
Check that the main
cable is plugged into
the power socket.
No sound or picture,
but thefront panel
shows red light.
The receiver is in
standby mode
Press the standby
button.
Bad picture / blocking
error.
Signal is too strong.
Connect a signal
attenuator to the
antenna input.
Antenna noise factor
too high.
Change to an antenna
with lower noise factor.
The antenna is faulty. Change the antenna.
The picture is not dis-
played on the screen,
when switching on.
The system is con-
nected by RF leads.
Check the UHF channel
xed in your system
and tune the UHF
channel properly.
There is interference
on your terrestrial pro-
gram or video signal.
The system is connected
by RF leads and the
output program of the
receiver interferes with
an existing terrestrial
programs or Video
signal.
Change the receiver
output program to a
more suitable program,
or connect the system
by SCART leads.
The RCU is not working.
Battery exhausted. Change the batteries.
RCU is incorrectly
aimed.
Aim RCU at the receiver,
or check that nothing
blocks the front panel.
Note: If you have tried all of the actions suggested above, without solving the
problem, please contactyour dealer ora customer service adviser.