Specifications

3
This application shows the Electrak 2000
actuator positioning the heating head
that is used in sealing plastic bags.
Positioning and timing are critical to seal
the bag and to avoid burning through it.
This could be typical of applications that
require positioning tooling work heads,
cutters or drills.
This application shows an Electrak 2000
actuator positioning a table. The actuator is
mounted outside the table for the lowest
possible height of the unit. In other applications
the actuator may be mounted below the
platform and between the bearings with the
platform passing over the actuator. Multiple
units may be combined for x, y, and z axes.
This Electrak 2000 actuator is positioning
valves inside an enclosure. The
application is typical of positioning gates,
valves, dampers or chutes.