Specifications

4
Design Features
An inside look…
Parallel configuration
(Shown with acme screw and gear
drive. Other configurations are
available.)
In-line configuration
(Shown with ball screw and direct
drive. Acme screw drive is also
available.)
Encoder feedback option on
the motor for closed loop
positioning control
Holding brake option on
the motor is also available
to control backdriving of
ball screw version in the
event of electrical power
failures.
Threaded cable entry
and watertight
connector provides
washdown capability.
Direct coupled motor and lead
screw on all in-line actuators
provide minimal system lash.
Acme screw with self
locking operation
eliminates backdriving in
case of power failure or
motor stall.
Roller thrust bearings on high load
versions for smooth operation, high load
capacity and long life. Ball bearings are
used in high speed versions.
Mounting options include
clevis, front flange, side tapped
holes, and mounting feet
Belt, gear or direct coupled
depending on ratio and
configuration of the actuator
Sealed motors for wash
down applications
(IP-56 rated)
Encoder
feedback option
on the motor for
closed loop
positioning
control
Anti-rotation
feature prevents
the extension
tube from
rotating.
Holding brake
option on the
motor is also
available to
control
backdriving of
ball screw
version in
the event of
electrical power
failures.
Sealed motors for wash down
applications (IP-56 rated)
Roller thrust bearings on high
load versions for smooth
operation, high load capacity and
long life. Ball bearings are used in
high speed versions.
Ball screw for high
load and high speed
applications
Screw terminals on size
34 and size 42 motors
provide ease of wiring.