Specifications

7
SLO-SYN
2000
®
2000
SLO-SYN
®
Acme Screw Models Ball Screw Models
Maximum Dynamic
Load (lbs.)
150 250 300 1000 500 700 1000 2000 250 400 500 440 1100
Maximum Speed
(in./sec.)
9 6 4 1.75 7 5 4 1.9 17 14 12 25 10
Drive Ratio 1.0:1 1.5:1 2.0:1 5.0:1 1.0:1 1.5:1 2.0:1 5.0:1 1.0:1 1.5:1 2.0:1 1.0:1 1.0:1
Screw Lead 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.5 0.5 0.5 0.5 0.2
**Step Motor
Frame Size
93 93 93 93 93 93 93 93 93 93 93 12 12
Control Required
SS2000I and SS2000I and SS2000I and SS2000I and
SS2000D6 SS2000D6 SS2000D6 SS2000D6
Programming options
Software diskette packet – this diskette
allows the control to be programmed
directly from an IBM
®
compatible
personal computer. It provides the
handshake, is menu driven and displays
in linear units rather than steps. A 10 foot
cable is provided to connect the
computer to the control. The software
diskette packet is included with the
control.
Controls
SloSyn 2000 control is available as a
separate indexer and driver. It is switch
selectable between full, half or
microstepping and is designed for use
with size 34 three stack motors (BI93 or
BP93) and size 42 motors (BI12). Current
output is selectable on the drive portion
of the control up to 6 amps. (Size 34
motors require 3 amps, size 42 motors
require 6 amps). The I/O wire directly to
the control.
Cable
Cable – a cable which interconnects
the control and actuator is required.
It is available in 10, 25, or 50 foot
lengths.
* Maximum speeds are not possible at maximum rated dynamic load.
Consult the speed / load charts on pages 10-15 for actual performance ratings.
** 93 = size 34 triple stack
12 = size 42 (in line only)
For SS2000
series controls
SS2000I
and
SS2000D6
Diskette