LPG TANK EQUIPMENT
Please be so kind to verify with us approvals, accessories (tubes, tubes materials, tubes fixing, anti-filling devices, tools for anti-filling devices, caps, sealants and settings) and optional features. Approvals of any kind have to be expressly specified on orders or enquires. For orders please refer to: tel. +39 030 9663.111 - fax +39 030 9969014 Website: www.cavagnagroup.com E-mail: omeca@cavagnagroup.
Questa sezione del catalogo è dedicato alla memoria di Paolo Cominelli, il cui contributo fattivo e propositivo ha influito in modo determinante alla stesura e alla raccolta delle informazioni tecniche in esso contenute. This section is dedicated in Paolo Cominelli's memory for his meritorius service to the collection of technical data gathered to help create much of the written text included herewith. Im Gedenken an Paolo Cominelli widmen wir ihm diese Sektion.
EDITION JUNE 2005 LPG VALVES & EQUIPMENT DIVISION Multiservice Valve 67.0805 67.0.490.0805 NEW DESIGN APPLICATION These multivalves are suitable for 100-200 lbs DOT or ASME containers. The 67.0812 can also be used for a 60 gallons tank.
EDITION JUNE 2005 LPG VALVES & EQUIPMENT DIVISION Multiple head unit 67.0807 67.0.490.0807 Multi Service Valve for ASME underground Propane tank. APPLICATION These multiservice valves are designed for use in a single opening ASME containers with a riser of 2 1/2” MNPT. A separate opening is required for liquid withdrawal valve.
EDITION JUNE 2005 LPG VALVES & EQUIPMENT DIVISION Multiservice Valve 67.0720 67.0.490.0720 APPLICATION Multiservice valve suitable for ASME tanks where a vapor service valve is required. This valve incorporates in the same body a service valve, a vapour withdrawal valve and a fixed level gauge. Features Improved Stem Seal - Two seals - a back seat and an O-ring (both TFE coated) protect against stem leakage in the service valve portion.
EDITION MAY 2007 LPG VALVES & EQUIPMENT DIVISION Filler Valves 66.1122 66.0.290.1122 Double Check Filler Valve. 66.1232 NEW NEW 66.0.290.1232 DESIGN DESIGN Features Double Back Check Construction - All Omeca filler valves are of the double back check construction where there are: (1) a soft seated up back check, and (2) a metal–to-metal lower back check seat or also a rubber seated back check like in the 66.1104.
EDITION JUNE 2005 LPG VALVES & EQUIPMENT DIVISION Filler Valves VRN 90 66.0.290.1051 Filler valve for LP-GAS tanks. TUV approved. Furnished with solid brass cap. VRN 20L 66.0.290.1061 This is a special filler valve, designed for stationary underground tanks. This design facilitates the connection between the stationary tank and the hose of LPG tank truck. VRN 93 FEATURES 66.0.290.
EDITION JUNE 2005 LPG VALVES & EQUIPMENT DIVISION Filler Valves with overfilling prevention device 66.1101 66.1106 VRN SC-1200 Filler valve suitable for underground tank. The extended body allows an easier refilling operation. Filler valve with high flow capacity suitable for above ground containers. Specify tank size when ordering. As the other valves that incorporates an OPD, this filler has in addition an extended filler valve with ball shut-off valve manually operated. 66.0.290.1101 66.0.290.
EDITION JUNE 2005 LPG VALVES & EQUIPMENT DIVISION Filler Valves NEW NEW DESIGN DESIGN 66.1115 66.0.290.1115 Filler valve for vertical ASME and DOT containers. Specify tank diameter when ordering. Suitable for a 300 litres or 420lbs vertical tank. They can be fitted to other tank sizes upon request. 66.1154 66.0.290.1154 For Automotive Application 66.1157 66.0.290.1157 APPLICATION These filler valves fitted with an OPD device are suitable for direct filling automotive applications.
EDITION JUNE 2005 LPG VALVES & EQUIPMENT DIVISION Internal Pressure Relief Valves for ASME and DOT Containers Designed specifically for use as a primary pressure relief device on ASME containers up to 2000 gallons water capacity. Furnished with rain cap for protection against contamination. See ordering information for part numbers. All these valves have a pre-applied sealant on the container connection. Most of these valves are ASME approved. 66.1128 NEW 66.1135 NEW 66.1129 NEW 66.0.290.
EDITION JUNE 2005 LPG VALVES & EQUIPMENT DIVISION Rain caps for Internal Pressure Relief valves Vinyl or plastic plastic Vinyl 10.5032 10.5036 10.5033 10.5037 30.0274 30.0273 30.0276 O R D E R I N G I N F O R M AT I O N plastic 10.5038 10.0203 10.0204 10.0205 Type for Part number 66.1029 66.1129 30.0.110.0273 - 10.0.110.5033 - 10.0.950.0204 66.1030 30.0.110.0274 - 10.0.110.5036 66.1128 30.0.110.0274 - 10.0.950.0203 66.1031 66.1130 30.0.110.0276 - 10.0.110.5037 - 10.0.950.0205 66.
Internal Pressure Relief Valves for DOT fork lift Cylinders EDITION JUNE 2005 LPG VALVES & EQUIPMENT DIVISION FORK LIFT CYLINDER VALVES 66.1027 66.0.290.1027 Designed specifically for use as primary relief valve on fork lift cylinders. A 45° deflector adapter is already included into the body of the valve. The design of the valve is a one-piece hot forged brass body. 66.0248 66.0.290.0248 Designed specifically for use as primary relief valve on fork lift cylinders.
Service Valves for DOT Fork Lift and ASME Motor Fuel containers EDITION JUNE 2005 LPG VALVES & EQUIPMENT DIVISION FORK LIFT TRUCK 80.2062 80.0.380.2062 80.2063 80.0.390.2063 80.2064 80.0.390.2064 80.2146 80.0.390.2146 APPLICATION These valves are designed for vapor or liquid withdrawal service on DOT fork lift truck containers (80-2064) and ASME containers (all the others). All these valves are equipped with an excess flow limiter with different settings.
EDITION JUNE 2005 LPG VALVES & EQUIPMENT DIVISION FORK LIFT TRUCK Lift Truck Connectors These brass connectors are designed to join the carburator fuel line to the service valve on FLT. 66.1024 66.0.290.1024 A B Half coupling ACME. For installation on LP gas engine fuel lift truck service valves. 66.1023 66.0.290.1023 Female coupling ACME. - For installation on the carburator fuel line. - Both connectors automatically close when disconnected.
EDITION JUNE 2005 LPG VALVES & EQUIPMENT DIVISION Liquid Withdrawal Valves with excess flow All these valves are designed for liquid withdrawal from stationary containers. 69.0010 69.0.190.0010 This new liquid withdrawal valve is designed to provide withdrawing liquid from stationary tank prior to moving the tank. This valve can also be used on permanent installations being equipped with excess flow limiter. Designed according to the latest UL standard. 66.1109 66.0.290.
EDITION JUNE 2005 LPG VALVES & EQUIPMENT DIVISION Service Valves for ASME and DOT containers or fuel line application 80.3135 Designed expecially for vapor withdrawal service on ASME an dot containers. Since this valve has no integral pressure relief valve they may only be used as an accessory valve on containers that have an indipendent pressure relief valve sufficient for that container’s capacity. This valve can be used also as a service valve on a 420lbs tank or a 300lts horizontal tank.
EDITION JUNE 2005 LPG VALVES & EQUIPMENT DIVISION Service Valves for DOT Cylinders 80.6032 O R D E R I N G I N F O R M AT I O N 80.0.790.6032 Heavy duty POL Cylinder Outlet Normal Liquid valve with Part number DT length Relief Setting Connection Connection Application Level Gauge pressure relief valve for 200 lbs DOT Female propane cylinders. Cylinder POL 88.6033 3/4” NGT No No 375 Different DT (CGA 510) up to 500 lbs length. 80.5024 80.0.690.
Type 1 ACME Cylinder Valve with Overfill Prevention Device (OPD) EDITION MAY 2007 LPG VALVES & EQUIPMENT DIVISION LPG CYLINDER VALVES NEW These Type 1ACME valves (CGA791) are intended for DOT cylinders up to 40 pounds LP Gas capacity, (96 pounds water capacity), LP Gas service. This valve has a vapor service outlet, relief valve, captive fixed liquid level gauge, and an overfill prevention device (OPD). FEATURES LPG VALVE TYPE 1 MOD.
EDITION JUNE 2005 LPG VALVES & EQUIPMENT DIVISION LPG FLOAT GAUGES LPG FLOAT GAUGES LPG Float Gauges Flanged 4 bolt model These float gauges flanged 4 bolt models includes also a mounting. O R D E R I N G I N F O R M AT I O N NOMINAL ø Inches DIAMETER ø mm TANK type CONTAINER gallons CAPACITY litres 2069.U 24” 609,60 horizontal 120 454,25 2070.U 30” 762,00 horizontal 250/320 946,35/1.211,328 412 360 2071.U 37” 939,80 horizontal 500 1.892,70 510 438 2072.U 41” 1.
EDITION JUNE 2005 LPG VALVES & EQUIPMENT DIVISION LPG FLOAT GAUGES LPG Threaded Float Gauges All level gauges are produces in compliance to CEN TC 286-prEN 13799 standard. The float is made in SPANSIL rubber. This kind of material, cannot be detached from his lodge when getting in touch with caustic soda. These level gauges have been manufactured in accordance to the best available technology: a tropicalised zamac has been used both for the head and the gearing.
DIVISION Tank Equipment Spare Parts The manufacturer declines all responsibility for incorrect use or application. We recommend to use original parts or to replace the whole valve. Pressure gauge in glycerine bath. Scale 0-25 bar. Connection: 1/4" NPT. Type connection Part number Back side 30.0.110.0179 Radial 30.0.110.0180 Connection devices with excess flow check valve built in to be used with the multivalve GSE 35. 16.0.950.0039 (capacity 50 Kg.) 16.0.950.0052 (capacity 95 Kg.
EDITION MAY 2007 LPG VALVES & EQUIPMENT DIVISION Tank Equipment Spare Parts Plastic cap with ACME threading. Caps with ACME threading also available in brass. Type for Part number colour VRN14/20 10.0.950.0064 blue GSE 35/38 10.0.950.0062 blue 66.1026 10.0.950.0053 yellow 66.1028 10.0.950.0053 yellow 66.1104 10.0.950.0053 yellow 66.1073 10.0.950.0053 yellow Vent stem. (GSE 35 - GS 50) 03.0.950.0145 Rubber gasket for ACME thread cap. Type for Part number VRN20 04.0.110.
DIVISION APPLICATIONS DOT ASME Cylinder Valve FLOAT GAUGE (Refert to pages 14-15) SAFETY RELIEF VALVE AVAILABLE 66.1128 ASME - 66.1135 ASME FILLER VALVE 66.1104 MULTISERVICE VALVE 67.0805 DOT SERVICE VALVE 80.3135 The features described in this illustration do not bind the manufacturer. www.cavagnagroup.
EDITION MAY 2007 LPG VALVES & EQUIPMENT DIVISION APPLICATIONS Stationary tank installation RELIEF VALVES (depending on the tank size) 66.1128 66.1129 66.1130 LIQUID WITHDRAWAL VALVE 69.0010 FLOAT GAUGE (Refert to pages 14-15) MULTISERVICE VALVE 67.0720 FILLER VALVE 66.1232 or 66.1106 67.0807 www.cavagnagroup.com The features described in this illustration do not bind the manufacturer.
DIVISION APPLICATIONS DOT fork lift truck containers SAFETY RELIEF VALVE 66.0248 SERVICE VALVE 80.2064 FLOAT GAUGE CONNECTOR 66.1024 CONNECTOR 66.1023 FILLER VALVE 66.1122 FIXED LEVEL GAUGE Various DT lenghts The features described in this illustration do not bind the manufacturer. www.cavagnagroup.
EDITION JUNE 2005 LPG VALVES & EQUIPMENT DIVISION APPLICATIONS Motor Fuel Tanks FILLER VALVE 66.1122 SERVICE VALVE 80.2062 or 80.2063 80.2146 SAFETY RELIEF VALVE 66.1135 - 66.1162 ASME FIXED LEVEL GAUGE Various DT lenghts 66.1154 66.1157 FILLER VALVE with OPD www.cavagnagroup.com The features described in this illustration do not bind the manufacturer.
EDITION JUNE 2005 LPG VALVES & EQUIPMENT DIVISION Multiservice Valves GSE 35 GS 50 67.0776 (above gr.) 67.0794 (undergr.) 67.0775 (above gr.) 67.0792 (undergr.) Multiservice Valve Multiservice Valve equipped with equipped with a pressure a pressure gauge in glycerine gauge in glycerine bath, bath, 0÷25 bar scale, and a fixed level gauge to ensure 80% of tank 0÷25 bar scale, and a fixed level gauge to ensure filling. It incorporates an excess 80% of tank filling.
EDITION JUNE 2005 LPG VALVES & EQUIPMENT DIVISION Compact Underground Tank Set Spare a bung drill in your tank with this new concept installation set that makes the use of bulky pressure relief devices needless. 1 - FLOAT GAUGE 2 - LIQUID WITHDRAWAL VALVE 3 - MULTISERVICE VALVE 4 - FILLER VALVE 5 - FIRST STAGE REGULATOR 6 - SECOND STAGE REGULATOR 7 - APPLICATIONS 7 7 ✓ New Concept ✓ Easy On ✓ Low Impact 6 7 2 1 LF-25 - 69.0004 Liquid withdrawal valve. (See page Ee1) 2 3 5 4 GS-90 - 67.
EDITION JUNE 2005 LPG VALVES & EQUIPMENT DIVISION Filler Valves VRN 90 66.1051 VRN 20L 66.1063 Features Double Back Check Construction - All Omeca filler valves are of the double back check construction where there are: (1) a soft seated up back check, and (2) a metal–to-metal lower back check seat. Efficient Flow Characteristics - The efficient flow channel design of the valves gives low flow resistance, prolonging pump and hose life, and high filling capacity.
EDITION JUNE 2005 LPG VALVES & EQUIPMENT DIVISION Filler Valves with Manual Ball Shut-off Features VRN 93 66.0221 VRN 88 67.
EDITION JUNE 2005 LPG VALVES & EQUIPMENT DIVISION Filler Valves with Overfilling Prevention Device 66.1101 66.1106 VRN SC-1200 Filler valve suitable for underground tank. The extended body allows an easier refilling operation. Filler valve with high flow capacity suitable for above ground containers. Specify tank size when ordering. 66.1093 As the other valves that incorporates an OPD, this filler has in addition an extended filler valve with ball shut-off valve manually operated.
EDITION JUNE 2005 LPG VALVES & EQUIPMENT DIVISION External Pressure Relief Valves Designed for use as primary relief valves on ground and underground tanks. EU 19 EU 24 70.0014 70.0008 Pressure relief valve with conical thread between valve and lower check valve. Setting point: 17,65 bar. ST 19 71.0005 EU 20 70.0026 Pressure relief valve with cylindric thread to be used in connection with the lower check valve. Tightness assured by bonded seal. Setting point: 17,65 bar. ST 20 71.
EDITION JUNE 2005 LPG VALVES & EQUIPMENT DIVISION External Pressure Relief Valves VS 367 17 bar VS 368 18 bar 70.0020 70.0008 VS 60 70.0080 Pressure relief valve with a lower check valve available with different inlet threads. ST 36 Safety relief valve with big capacity. 71.0.190.0026 EU 29 VS 456 16 bar VS 45717 bar 70.0016 Pressure relief valve with conical thread between valve and lower check valve. Setting point: 17,65 bar. 70.0015 70.0031 Pressure relief valve with a lower check valve.
EDITION JUNE 2005 LPG VALVES & EQUIPMENT DIVISION Liquid Withdrawal Valves VL 13 Liquid withdrawal valve. RL 15 72.0004 Liquid Transfer Valve to be used with our VL 13 and VLT 18. It incorporates an excess flow limiter. VL 25 69.0005 Liquid withdrawal valve to be used with our RL 25 Liquid Withdrawal Valve. RL 25 72.0025 Liquid Transfer Valve to be used with our VL 25. It incorporates an excess flow limiter. RL 11 72.0029 Liquid Transfer Valve. RRL 16 A-P 67.
EDITION JUNE 2005 LPG VALVES & EQUIPMENT DIVISION Liquid withdrawal valves VLT 18 69.0020 Liquid withdrawal valve with dip tube available in different lengths according to various tank sizes, to be used in connection with our RL 15 Liquid Withdrawal Valve. LF 14 69.0038 LF 25 Liquid withdrawal Excess Flow Valve. Performance: excess flow closes 25.5÷3 m3/h (water); residual flow ≤ 0.020 m3/h (water) with ∆P +1 bar NEW 69.0004 Liquid withdrawal Excess Flow Valve. DESIGN VLF 14-C 69.
EDITION JUNE 2005 LPG VALVES & EQUIPMENT DIVISION LPG Float Gauges Product was redesigned to provide comprehensive up-dating as well as a 100% operating efficiency. Our LPG float gauge can also provide full performance even under the following critical conditions: a when humidity for any reason is found within the LPG tank. b when the transmission components are subjected to very low temperatures. The indicator is complete with plastic cover, or gasket and stainless steel screws.
EDITION JUNE 2005 LPG VALVES & EQUIPMENT DIVISION Tank Equipment Spare Parts The manufacturer declines all responsibility for incorrect use or application. We recommend to use original parts or to replace the whole valve. Pressure gauge in glycerine bath. Scale 0-25 bar. Connection: 1/4" NPT. Type connection Part number Back side 30.0.110.0179 Radial 30.0.110.0180 Connection devices with excess flow check valve built in to be used with the multivalve GSE 35. 16.0.950.0039 (capacity 50 Kg.) 16.0.
EDITION JUNE 2005 LPG VALVES & EQUIPMENT DIVISION Stationary Tank Installation RELIEF VALVES (depending on the tank size) (Refer to pages Ce1 - Ce2) FLOAT GAUGES (Refer to page He1) LIQUID WITHDRAWAL VALVES (Refer to pages Ee1 - Ee2) MULTISERVICE VALVES (Refer to pages Ae1 - Ae2) FILLER VALVES (Refer to pages Be1 - Be2 - Be3) The features described in this illustration do not bind the manufacturer. www.cavagnagroup.
LPG CYLINDER VALVES
Please be so kind to verify with us approvals, accessories (tubes, tubes materials, tubes fixing, anti-filling devices, tools for anti-filling devices, caps, sealants and settings) and optional features. Approvals of any kind have to be expressly specified on orders or enquires. The range of photos shown is indicative. Please contact LPG VALVES & EQUIPMENT DIVISION Staff to find a product suitable for each specific market. For orders please refer to: tel. +39 030 9663.
EDITION JUNE 2005 LPG VALVES & EQUIPMENT DIVISION German LPG Cylinder Valves 80.6019 80.6.790.6019 Open-close handwheel valve with pressure relief device. DIN KLEIN BAM - APPROVED π - APPROVED 15 years reconditioning 80.6018 80.6.790.6018 Heavy duty valve with pressure relief device for 33 Kg. LPG cylinders. DIN GROSS BAM - APPROVED π - APPROVED 15 years reconditioning 80.3023 80.6.490.3023 FLT cylinder valve for liquid withdrawal up to 33 Kg. LPG cylinders.
EDITION JUNE 2005 LPG VALVES & EQUIPMENT DIVISION German LPG Cylinder Valves 80.6101 80.6.790.6101 LPG cylinders valve for welding application. Vaious lengths of tubes. DIN KLEIN DEGASSING SCREW BAM - APPROVED O R D E R I N G I N F O R M AT I O N Cylinder Outlet Normal Liquid Part number Connection Connection Application Level Gauge 80.6101 V2 DIN 477 KLEIN www.cavagnagroup.
EDITION JUNE 2005 LPG VALVES & EQUIPMENT DIVISION LPG Handwheel Valves 80.8066 80.0.890.8066 POL valve for 10 kg cylinders. 80.4009 80.0.590.4009 80.5024 POL cylinder valve with pressure relief valve. DOT cylinder valve for vapor up to 100 Lbs LPG capacity. 80.4002 80.0.590.4002 80.6033 POL valve with pressure relief valve with fixed liquid level tube. 80.0.790.6033 POL valve with pressure relief valve for 240 Lbs propane cylinders. Available also with fixed liquid level gauge. 80.5038 80.
EDITION JUNE 2005 LPG VALVES & EQUIPMENT DIVISION LPG Handwheel Valves The wide acceptance of Omeca cylinder valves is based on their reliable performance as well as their reputation for engineering and manufacturing excellence. Omeca utilize seat discs and stem seals which resist deterioration and provide the kind of reliable service required for L.P. GAS, hand-tight closings and a faster filling cylinder valve. 80.1059 80.6.290.1059 Open-close valve. Available in several sizes of outlets and inlets.
EDITION JUNE 2005 LPG VALVES & EQUIPMENT DIVISION LPG Handwheel Valves 80.4014 80.0.590.4014 80.1019 Open-close valve with pressure relief valve for small size propane cylinders. Available with several inlets and POL outlets. 80.0.290.1019 LP Cylinder valve with seal gasket on the outlet. 80.2122 80.0.390.2122 Cylinder valve with rubber flow limiter 80.2120 80.6.390.2120 80.3098 Cylinder valve with flow limiter. 80.6.490.3098 Cylinder valve with dual locking pins and brass dip tube. 62.
EDITION MAY 2007 LPG VALVES & EQUIPMENT DIVISION LPG Jumbo Valves 66.0071 66.8.290.0071 "Jumbo" valve with safety relief. Various settings available. 19,8 x 1/4” DIN 477 inlet. 66.0205 66.8.290.0205 "Jumbo" valve with safety relief. Various inlets. Various pressure settings available. 66.0064 66.8.290.0064 “Jumbo” valve 66.0241 with safety relief valve. 66.0.290.0241 Inlet thread M24 x 1,5 (parallel) “Jumbo” valve with fusible plug.
EDITION JUNE 2005 LPG VALVES & EQUIPMENT DIVISION LPG Jumbo Valves in one piece with Safety Relief Cartridge 66.0038 (A) 66.8.290.0038 NEW One-piece “Jumbo” with safety relief valve cartridge. Various inlets/outlets and setting pressures. 66.0038 (B) 66.8.290.0038 NEW One-piece “Jumbo” without pressure relief device. Various inlets/outlets. DESIGN DESIGN 10.0057 10.0058 Blue cap. Special protection cap with cold-resistance for low temperatures. Black cap. Standard protection cap.
EDITION JUNE 2005 LPG VALVES & EQUIPMENT DIVISION LPG Snap-tight and Bayonet Valves 66.0131 66.0.290.0131 Dual sealing valve with safety relief. Outlet 27 mm, various inlets. 66.0132 66.0.290.0132 Dual sealing valve. Outlet 27 mm, various inlets with flow limiter. 66.0259 66.0.290.0259 Quick-on valve outlet 27 mm, various inlets. 66.0135 66.0.290.0135 Bayonet valve various inlets with flow limiter. 66.0136 66.0.290.0136 Bayonet valve with safety relief, various inlets with anti-debris tube.
EDITION JUNE 2005 LPG VALVES & EQUIPMENT DIVISION LPG Quick-on Valves 66.0049 66.0.290.0049 "Quick-on" valve with pressure relief valve. Outlets Ø 20-21-22 mm, various inlets. Available with anti-debris tube. 66.0022 66.9.290.0022 Compact quick-on valve without pressure relief device. Various inlets; ø 20, 21 and 22 mm outlets. 66.0067 66.8.290.0067 "Quick-on" valve with plastic dip-tube without pressure relief valve. Available with anti-debris tube. 66.0005 66.8.290.
EDITION JUNE 2005 LPG VALVES & EQUIPMENT DIVISION Flat Top Dirt-Free LPG Quick-on Valves NEW V10 A series Quick-on valve with flat top, full dirt protection without pressure relief valve. Various inlets/outlets. V10 B series Quick-on valve with flat top, full dirt protection with pressure relief device (various settings). ✓ Real flat top New Concept ✓ Dirt protection ✓ Makes dust & protection caps useless 1) One piece Quick-on valve with or without Safety Relief cartridge.
EDITION JUNE 2005 LPG VALVES & EQUIPMENT DIVISION LPG Quick-on Valves 66.0001 66.8.290.0001 "Quick-on" valve. Outlets Ø 20-21-22 mm, various inlets with plastic cap. 66.0060 66.0.290.0060 Snap-on valve Self-closing valve with built-in safety valve. This valve combining with RECA regulator guarantees constant outlet pressure, indipendent of cylinder pressure and of through-put. Available with different inlet thread sizes. 66.0013 66.8.290.0013 66.0051 66.8.290.0051 66.0054 66.8.290.
EDITION JUNE 2005 LPG VALVES & EQUIPMENT DIVISION For the Best Performance Quick-On System Cavagna Group Valves and Regulators In many countries of the world the old system of manual connection of the regulator to the valve has been replaced by a quick on system allowing a consistent safe connection for the consumer without the need for tools. This system makes possible an easier vertical filling operation.
EDITION JUNE 2005 LPG VALVES & EQUIPMENT DIVISION Quick-On System Jumbo 58 Low Pressure double stage regulator with non-adjustable setting with fitting suitable for automatic valves Ø 35 mm. On demand, it is possible to assemble an excess flow and a OPSO device (safety relief valve), in order to avoid any overpressure.
EDITION JUNE 2005 LPG VALVES & EQUIPMENT DIVISION Fork Lift Truck and Carburation Valves Omeca is introducing a new technology on the valve with dip tube for liquid withdrawal. To overcome all wellknow problems with copper or brass dip tube, we introduce a new polyamide dip tube with hi-tech performance. Fully compatible with LPG, these will be the second generation of carburation valves 00.0000 00.0.000.0000 Quick-on safety adapter for FLT application. 80.3072 80.3014 80.0.490.
EDITION JUNE 2005 LPG VALVES & EQUIPMENT DIVISION Fork Lift Truck and Carburation Valves 80.3024 80.0.490.3024 New 2nd generation FLT valve. 80.3028 NEW DESIGN 80.0.490.3028 FLT valve with long Pipe outlet 3/4 GG. 80.2064 80.0.390.2064 FLT service valve with flow limiter. Various inlets and outlets. 80.2062 80.0.380.2062 FLT service valve with flow limiter. Various inlets and outlets. 66.1072 66.0.290.1072 1/4’’ NPT V16 www.cavagnagroup.com Fixed liquid level gauge.
EDITION JUNE 2005 LPG VALVES & EQUIPMENT DIVISION Fork Lift Truck and Carburation Valves 80.3145 80.0.490.3145 New European FLT valve with short dip tube DIN 477 outlets and various customisable NEW NEW 80.8060 DESIGN 80.8021 DESIGN 80.0.890.8060 Liquid withdrawal valve with flow limiter. Vertical application. DESIGN 67.0779 67.0.490.0779 Dual valve with safety relief and flow limiter. Various inlets, male outlet. NEW 80.0.890.8021 FLT valve with safety relief and flow limiter.
EDITION JUNE 2005 LPG VALVES & EQUIPMENT DIVISION LPG Cut-Off Valves V641 64.0.190.0164 Stop valve. 6404 64.0003 Needle valve. Various sizes. 64.0.490.0003 “Push and turn” stop valve. 64.0026 64.0.490.0026 64.0043 64.0.490.0043 “Push and turn” stop valve double version. “Push and turn” stop valve, triple version. 80.0501 80.6.190.0501 Piston type stop valve. Various sizes. IM68 Switch “on-off” 3-way valve, various sizes. 80.0003 80.6.190.0003 Piston type side entry stop valve 90° F. M. 80.
EDITION JUNE 2005 LPG VALVES & EQUIPMENT DIVISION LPG Camping Cylinder Valves 64.0203 64.0.290.0203 Volume filling valve with safety relief. 64.1091 64.0.390.1091 64.0253 3-way camping valve with degassing screw. Various inlets and outlets. 64.0.290.0253 5-ways camping valve with safety relief and degassing screw for volume filling. Various inlets and outles. 64.2028+68.0043 Camping cylinder ball valve with handle and gasket. Outlet: 16x1,5. 64.0266 64.0.290.
EDITION JUNE 2005 LPG VALVES & EQUIPMENT DIVISION LPG Camping Cylinder Valves 64.0106 64.0.190.0106 Camping valve with gasket. Various inlets and outlets. 64.4500 64.0.790.4500 64.0124 Needle valve for gas heaters. Available with various nozzle sizes for different capacities. 64.0.190.0124 3-way camping valve for cartridges. Various sizes of inlet and outlet. 64.1089 64.0.390.1089 Camping valve for volume filling with degassing screw. 64.0310 64.0.390.
REFRIGERANT GASES VALVES
Please be so kind to verify with us approvals, accessories (tubes, tubes materials, tubes fixing, anti-filling devices, tools for anti-filling devices, caps, sealants and settings) and optional features. Approvals of any kind have to be expressly specified on orders or enquires. For orders please refer to: tel. +39 030 9663.111 - fax +39 030 9969014 Website: www.cavagnagroup.com E-mail: omeca@cavagnagroup.
RUS EDITION JUNE 2005 LPG VALVES & EQUIPMENT DIVISION series Compact Refrigerant Recovery Valves O-Ring Style Cylinder Valves for Refrigerant Gases Liquid/Vapor Key features • Tamper proof gland nut cannot be removed • Hot forged body manufactured by Cavagna Group • Non-refillable outlet feature, protects cylinder from contamination • All valves are 100% leak test to full cylinder service pressure • Complies with all New European Standards (π marked) • Hose barb supplied for easy attachment of
EDITION JUNE 2005 LPG VALVES & EQUIPMENT RDU DIVISION series Diaphragm Packless Multivalves for Refrigerant Gases Key features • Hot forged brass body according to EN12165 alloy manufactured by Cavagna Group • Diaphragm packless style valves • Inlet and outlet connection comply with CGA specifications • UL approved • Available single or dual outlet Materials Valve Body Brass Handwheel Plastic Diaphragm Stainless steel Spring Stainless steel Spring Retainer Brass PRD seal cap Plas
RBV EDITION JUNE 2005 LPG VALVES & EQUIPMENT DIVISION series Diaphragm Packless Valves for Refrigerant Gases Key features • Hot forged brass body according to EN12165 alloy • Stainless steel diaphragm guarantee against breakage for the life of the valve • Blue nylon handwheel designed for easy operation • Inlet and outlet connection comply with CGA specifications • Spring loaded pressure relief device Materials Valve Body Brass according to brass alloy EN12165 Handwheel Plastic Diaphr
EDITION JUNE 2005 LPG VALVES & EQUIPMENT ROB DIVISION series Refrigerant cylinder valves O-ring style valves Key features • These valves are o-ring seal type valves • Double o-ring materials technology reduces the possibility of leaks • Sturdy brass handwheel united with the original Qualihandwheel® Cavagna system.
ROY EDITION JUNE 2005 LPG VALVES & EQUIPMENT DIVISION series Compact Refrigerant Recovery Valves O-Ring Style Cylinder Valves for Refrigerant Gases Liquid/Vapor Key features • Tamper proof gland nut cannot be removed • Rugged brass forged body manufactured by Cavagna Group • All valves are 100% leak test to full cylinder service pressure • Complies with all New European Standards • Hose barb supplied for easy attachment of Dip Tube • All valves U.L.
EDITION JUNE 2005 LPG VALVES & EQUIPMENT ROY DIVISION series Compact Refrigerant Recovery Valves O-Ring Style Cylinder Valves for Refrigerant Gases Liquid/Vapor O rdering I n f ormation Outlet Outlet Inlet Dip Tube Part No. CGA Outlet Single/Dual Material PRD Thread Size Thread Size Length .4375-20 UNF-2A RH Ext. 76-0180 165 Dual 3/4” NPT Brass 525 PSI barb (1/4” SAE Flare) .4375-20 UNF-2A RH Ext. 76-0181 165 Dual 3/4” NPT Brass 525 PSI 13.
RES EDITION JUNE 2005 LPG VALVES & EQUIPMENT DIVISION series Multiservice wrench operated valve for Refrigerant Gases Key features • Heavy duty multiservice valve available with single or dual part • Tamper proof gland nut cannot be removed • Rugged brass forged body manufactured by Cavagna Group • Non-refillable outlet feature, protects cylinder from contamination options • All valves are 100% leak test to full cylinder service pressure • Complies with all new European standards (CE Registered)
EDITION JUNE 2005 LPG VALVES & EQUIPMENT RIV DIVISION series Heavy duty Refrigerant gas valves O-ring style Key features • Hot forged brass body according to EN12165 alloy manufactured by Cavagna Group • Heavy duty refrigerant gas valve • Easy handwheel operation under pressure • Spring retaned pressure relief valve suitable for bigger cylinders • Double o-ring seal type valve Materials Body Brass Handwheel Aluminum O-ring CR Spindle Brass Antifilling device Plastic and brass PRD Spring Sta
FILLING HEADS
PRODUCT DESCRIPTION The Kosan Filling Head is based on the experience gained during the past 40 years when Kosan Teknova A/S has been developing, manufacturing and supplying LPG equipment to customers all over the world. The unique design and quality of the Kosan Filling Head offer the consumer the highest degree of safety when LPG is used. Maintenance and Repair Manuals for Filling heads are available upon requests.
EDITION JUNE 2005 LPG VALVES & EQUIPMENT DIVISION LPG Filling Head for LPG Valves 16, 19 and 35 mm (Jumbo and Kosanova valves) Manually Operated Materials and standards The Filling Head is made of corrosion-resistant materials such as stainless steel, brass, aluminium and special polymers. The rubber materials used are developed and manufactured according to the requirements of EN 549. Features 1. Balanced jig for easy suspension between filling operations. 2. Easy to connect and disconnect.
EDITION JUNE 2005 LPG VALVES & EQUIPMENT DIVISION LPG Filling Head for LPG Valves 16, 19 and 35 mm (Jumbo and Kosanova valves) Manually Operated O RD E R I N G I N F O R M AT I O N REFERENCE NUMBERS INLET CONNECTION OUTLET CONNECTION 6882900001 ISO 228/1 - G3/8 KOSAN LPG VALVES 35 mm type 130B - with and without SRV 6882900002 W 21,8 x 1/14 LH KOSAN LPG VALVES 35 mm type 130B - with and without SRV W 21,8 x 1/14 LH 6882900003 KOSAN LPG VALVES 35 mm type 130B - with and without SRV
EDITION JUNE 2005 LPG VALVES & EQUIPMENT DIVISION LPG Filling Head for LPG Valves 16, 19 and 35 mm (Jumbo and Kosanova valve) Semi-automatically Operated Materials and standards The Filling Head is made of corrosion-resistant materials such as stainless steel, brass, aluminium and special polymers. The rubber materials used are developed and manufactured according to the requirements of EN 549. Features 1. Balanced jig for easy suspension between filling operations. 2. Easy to connect and disconnect.
EDITION JUNE 2005 LPG VALVES & EQUIPMENT DIVISION LPG Filling Head for LPG Valves 16, 19 and 35 mm (Jumbo and Kosanova valve) Semi-automatically Operated O RD E R I N G I N F O R M AT I O N REFERENCE NUMBERS INLET CONNECTION OUTLET CONNECTION 6882900020 LPG: ISO 228/1 - G3/8 AIR: ISO 228/1 - G1/4 KOSAN LPG VALVES 35 mm type 130B - with or without SRV 6882900021 LPG: ISO 228/1 - G3/8 AIR: ISO 228/1 - G1/4 KOSAN LPG VALVES 35 mm type 130B - with or without SRV 6882900023 LPG: ISO 228/1
EDITION JUNE 2005 LPG VALVES & EQUIPMENT DIVISION LPG Filling Head for Kosanova LPG Valves 16 mm Manually Operated Materials and standards The Filling Head is made of corrosion-resistant materials such as stainless steel, brass, aluminium and special polymers. The rubber materials used are developed and manufactured according to the requirements of EN 549. Features 1. Easy to connect and disconnect. Filling is initiated by applying the filling pressure. 2.
EDITION JUNE 2005 LPG VALVES & EQUIPMENT DIVISION LPG Filling Head for Kosanova LPG Valves 16 mm Manually Operated O RD E R I N G I N F O R M AT I O N REFERENCE NUMBERS INLET CONNECTION OUTLET CONNECTION 6882900025 W 21,8 x 1/14 LH KOSANOVA LPG VALVES type 176A, 16 mm with and without SRV 6882900026 ISO 228/1 - G1/4 KOSANOVA LPG VALVES type 176A, 16 mm with and without SRV K6 www.cavagnagroup.com The features described in this illustration do not bind the manufacturer.
EDITION JUNE 2005 LPG VALVES & EQUIPMENT DIVISION LPG Filling Head for Compact LPG Valves 20, 21, 22, 25.6, 27 mm Manually Operated Materials and standards The Filling Head is made of corrosion-resistant materials such as stainless steel, brass, aluminium and special polymers. The rubber materials used are developed and manufactured according to the requirements of EN 549. Features 1. Balanced jig for easy suspension between filling operations. 2. Easy to connect and disconnect.
EDITION JUNE 2005 LPG VALVES & EQUIPMENT DIVISION LPG Filling Head for Compact LPG Valves 20, 21, 22, 25.
EDITION JUNE 2005 LPG VALVES & EQUIPMENT DIVISION LPG Filling Head for Compact LPG Valves 20, 21, 22, 25.6, 27 mm Semi-automatically Operated Materials and standards The Filling Head is made of corrosion-resistant materials such as stainless steel, brass, aluminium and special polymers. The rubber materials used are developed and manufactured according to the requirements of EN 549. Features 1. Balanced jig for easy suspension between filling operations. 2. Easy to connect and disconnect.
EDITION JUNE 2005 LPG VALVES & EQUIPMENT DIVISION LPG Filling Head for Compact LPG Valves 20, 21, 22, 25.6, 27 mm Semi-automatically Operated O RD E R I N G I N F O R M AT I O N INLET CONNECTION OUTLET CONNECTION 6882900029 LPG: ISO 228/1 - G3/8 Pneum. air: ISO 228/1 - G1/4 COMPACT LPG VALVES 27 mm - type 186C and to most SHELL type valves with and without SRV 6882900030 LPG: ISO 228/1 - G3/8 Pneum.
DIVISION LPG Filling Head for Camping Valves Manually Operated Materials and standards The Filling Head is made of corrosion-resistant materials such as stainless steel,brass and special polymers. The rubber materials used are developed and manufactured according to the requirements of EN 549. Features 1. Slim design makes it easy to handle and it fits easily inside any shroud. 2. Manual ON/OFF handle at the top is used for open/close of the gas flow and for attaching/ detaching the valve outlet thread.
EDITION JUNE 2005 LPG VALVES & EQUIPMENT DIVISION LPG Filling Head for Camping Valves Manually Operated O RD E R I N G I N F O R M AT I O N REFERENCE NUMBERS INLET CONNECTION 6882900053 1/4” NPT K12 www.cavagnagroup.com OUTLET CONNECTION M16 x 1,5 with and without SRV The features described in this illustration do not bind the manufacturer.
DIVISION LPG Filling Head for Handwheel Valves Semi-automatic Operated Materials and standards The Filling Head is made of corrosion-resistant materials such as stainless steel, brass, aluminium and special polymers. The rubber materials used are developed and manufactured according to the requirements of EN 549. Features 1. Insignificant loss of product (1 cm3) when the gas flow is cut off and the filling head is released from the cylinder valve. 2.
EDITION JUNE 2005 LPG VALVES & EQUIPMENT DIVISION LPG Filling Head for Handwheel Valves Semi-automatic Operated O RD E R I N G I N F O R M AT I O N REFERENCE NUMBERS 6882900042 K14 www.cavagnagroup.com INLET CONNECTION OUTLET CONNECTION LPG 1/4” AIR 3/8” Standard Handwheel male outlet without SRV The features described in this illustration do not bind the manufacturer.
EDITION JUNE 2005 LPG VALVES & EQUIPMENT DIVISION REFRIGERANT GASES Filling Head for Handwheel Valves Semi-automatic Operated Materials and standards The Filling Head is made of corrosion-resistant materials such as stainless steel, brass, aluminium and special polymers. The rubber materials used are developed and manufactured according to the requirements of EN 549. Features 1. Insignificant loss of product when the gas flow is cut off and the filling head is released from the cylinder valve. 2.
EDITION JUNE 2005 LPG VALVES & EQUIPMENT DIVISION REFRIGERANT GASES Filling Head for Handwheel Valves Semi-automatic Operated O RD E R I N G I N F O R M AT I O N REFERENCE NUMBERS 6882900043 K16 www.cavagnagroup.com INLET CONNECTION OUTLET CONNECTION REFRIGERANT GASES 1/4” AIR 3/8” Standard Handwheel male outlet with and without SRV The features described in this illustration do not bind the manufacturer.
EDITION JUNE 2005 LPG VALVES & EQUIPMENT DIVISION LPG Filling Head for Handwheel Valves, POL outlet Semi-automatic Operated Materials and standards The Filling Head is made of corrosion-resistant materials such as stainless steel, brass, aluminium and special polymers. The rubber materials used are developed and manufactured according to the requirements of EN 549. Features 1. Insignificant loss of product (1 cm3) when the gas flow is cut off and the filling head is released from the cylinder valve.
EDITION JUNE 2005 LPG VALVES & EQUIPMENT DIVISION LPG Filling Head for Handwheel Valves, POL outlet Semi-automatic Operated O RD E R I N G I N F O R M AT I O N REFERENCE NUMBERS 6882900044 K18 www.cavagnagroup.com INLET CONNECTION OUTLET CONNECTION LPG 1/4” NPT AIR 3/8” NPT Female POL thread valves with and without SRV The features described in this illustration do not bind the manufacturer.
EDITION JUNE 2005 LPG VALVES & EQUIPMENT DIVISION LPG Filling Head for Bayonet Valves Semi-automatic Operated Materials and standards The Filling Head is made of corrosion-resistant materials such as stainless steel,brass,aluminium and special polymers. The rubber materials used are developed and manufactured according to the requirements of EN 549. Features 1. Insignificant loss of product (1 cm3) when the gas flow is cut off and the filling head is released from the cylinder valve. 2.
EDITION JUNE 2005 LPG VALVES & EQUIPMENT DIVISION LPG Filling Head for Bayonet Valves Semi-automatic Operated O RD E R I N G I N F O R M AT I O N REFERENCE NUMBERS 6882900046 K20 www.cavagnagroup.com INLET CONNECTION OUTLET CONNECTION LPG 1/4” NPT AIR 3/8” NPT Automatic bayonet valve with and without SRV The features described in this illustration do not bind the manufacturer.
EDITION JUNE 2005 LPG VALVES & EQUIPMENT DIVISION LPG Filling Head for Coupling 66-0-290-1024 Semi-automatic Operated Materials and standards The Filling Head is made of corrosion-resistant materials such as stainless steel,brass,aluminium and special polymers.The rubber materials used are developed and manufactured according to the requirements of EN 549. Features 1. Insignificant loss off product (1 cm3) when the gas flow is cut off and the filling head is released from the cylinder valve. 2.
EDITION JUNE 2005 LPG VALVES & EQUIPMENT DIVISION LPG Filling Head for Coupling 66-0-290-1024 Semi-automatic Operated O RD E R I N G I N F O R M AT I O N REFERENCE NUMBERS 6882900047 K22 www.cavagnagroup.com INLET CONNECTION OUTLET CONNECTION LPG 1/4” NPT AIR 3/8” NPT Omeca coupling 66.0.290.1024 The features described in this illustration do not bind the manufacturer.
EDITION JUNE 2005 LPG VALVES & EQUIPMENT DIVISION LPG Filling Head for Handwheel Valves, OPD -type Semi-automatic Operated Materials and standards The Filling Head is made of corrosion-resistant materials such as stainless steel, brass, aluminium and special polymers. The rubber materials used are developed and manufactured according to the requirements of EN 549. Features 1. Insignificant loss of product (1 cm3) when the gas flow is cut off and the filling head is released from the cylinder valve. 2.
EDITION JUNE 2005 LPG VALVES & EQUIPMENT DIVISION LPG Filling Head for Handwheel Valves, OPD - type Semi-automatic Operated O RD E R I N G I N F O R M AT I O N REFERENCE NUMBERS 6882900050 K24 www.cavagnagroup.com INLET CONNECTION OUTLET CONNECTION LPG 1/4” AIR 3/8” OPD - female POL thread valve whith check-lock with and without SRV The features described in this illustration do not bind the manufacturer.
DIVISION LPG Filling Head for Handwheel Valves with ACME Thread Manually Operated ApplicationS LPG outlets without access to pressurized air well as plants where pressurization or vacuum purging of cylinders is required. Features Safe operation, easily connected and manually operated. SPECIFICATIONS Inlet connection: 1/4” NPT male thread Outlet connection: Connects to 1.312-5 ACME-2G, RH, EXT. Supply pressures: LPG, pressurized air or vacuum.
EDITION JUNE 2005 LPG VALVES & EQUIPMENT DIVISION LPG Filling Head for Handwheel Valves with ACME Thread Manually Operated O RD E R I N G I N F O R M AT I O N K26 REFERENCE NUMBERS INLET CONNECTION OUTLET CONNECTION 6882900055 1/4” NPT male thread 1.312-5 ACME - RH - EXT www.cavagnagroup.com The features described in this illustration do not bind the manufacturer.
DIVISION LPG Filling Head for Handwheel POL Valves Manually Operated ApplicationS LPG outlets without access to pressurized air well as plants where pressurization or vacuum purging of cylinders is required. Features Safe operation, easily connected and manually operated. SPECIFICATIONS Inlet connection: 1/4” NPT male thread Outlet connection: Connects to most standard POL valves. Supply pressures: LPG, pressurized air or vacuum.
EDITION JUNE 2005 LPG VALVES & EQUIPMENT DIVISION LPG Filling Head for Handwheel POL Valves Manually Operated O RD E R I N G I N F O R M AT I O N K28 REFERENCE NUMBERS INLET CONNECTION OUTLET CONNECTION 6882900056 1/4” NPT male thread Standard POL valves www.cavagnagroup.com The features described in this illustration do not bind the manufacturer.
DIVISION LPG Filling Head for Tank Filler Valves Manually Operated Materials and standards The Filling Head is made of corrosion-resistant materials such as stainless steel, brass, aluminium and special polymers. The rubber materials used are developed and manufactured according to the requirements of EN 549. Features 1. Easy and safe to connect and disconnect. Filling is initiated by operating the manual handle. 2. Slim design makes it easy to handle and it fits easily inside any shroud. 3.
EDITION JUNE 2005 LPG VALVES & EQUIPMENT DIVISION LPG Filling Head for Tank Filler Valves Manually Operated O RD E R I N G I N F O R M AT I O N REFERENCE NUMBERS INLET CONNECTION 6882900057 3/4” NPT K30 www.cavagnagroup.com OUTLET CONNECTION 1 3/4” x 6 ACME - 2g filler valve example: 66.0.290.1026 The features described in this illustration do not bind the manufacturer.
EDITION JUNE 2005 LPG VALVES & EQUIPMENT DIVISION Cross reference of Filling Heads VALVES Kosanova 16 mm type 176A, 130K SEMI-AUTOMATIC 6882900027 Kosanova 16 mm Not applicable type 176A Jumbo, Kosan 6882900020 type 130B 6882900021 MANUAL 6882900007 6882900008 6882900025 6882900026 6882900001 6882900002 6882900003 Kosanova 16 mm 130 K 6882900027 6882900004 Kosanova 19 mm 130L 6882900023 6882900024 6882900005 6882900006 Compact 6882900030 20 mm 6882900009 6882900010 6882
