Technical data

The features described in this illustration do not bind the manufacturer.
www.cavagnagroup.com
G 1
LPG CYLINDER VALVES
EDITION MAY 2007
LPG VALVE TYPE 1
MOD. P110
NEW
OVERFILL
PREVENTION
DEVICE
MOD. P1120
Type 1 ACME Cylinder
Valve with Overfill
Prevention Device (OPD)
FEATURES
Rapid Purging and filling with over One million
BTU Withdawal Capacity
Steel Safety Cage provides long-term
Operational Protection
Tri-lobular one-piece forged brass handwheel
Double “O-Ring” stem seal for improved
leak resistance
Includes Ever Seal sealant (pre-applied)
Quad “O-Ring” check valve seat,
opens only with positive seal
High capacity BTU withdrawal allows
fast purging and filling
Upward spray filling - eliminates
premature shutoffs
Steel safety cage surrounding critical welds -
provides additional protections to components
These Type 1ACME valves (CGA791) are intended for
DOT cylinders up to 40 pounds LP Gas capacity, (96
pounds water capacity), LP Gas service. This valve has
a vapor service outlet, relief valve, captive fixed liquid
level gauge, and an overfill prevention device (OPD).
NEW
Part Number Cylinder Cap. Container Conn. Outlet Conn. Relief Setting Dip Tube
80.8107 20lbs 3/4”-14 NGT Type 1 ACME and POL 375 PSIG 4.0”
80.8109 30lbs 3/4”-14 NGT Type 1 ACME and POL 375 PSIG 4.8”
80.8110 40lbs 3/4”-14 NGT Type 1 ACME and POL 375 PSIG 6.5”
80.8123 14lbs 3/4”-14 NGT Type 1 ACME and POL 375 PSIG 3.2”
80.2124 20lbs 3/4”-14NGT Type 1 ACME and POL 375 PSG 3.8”
LPG VALVES & EQUIPMENT
DIVISION