Technical data

EDITION JUNE 2005
www.cavagnagroup.com
K 5
LPG VALVES & EQUIPMENT
DIVISION
The features described in this illustration do not bind the manufacturer.
LPG Filling Head
for Kosanova LPG Valves 16 mm
Manually Operated
FEATURES
1. Easy to connect and disconnect. Filling is initiated by applying the filling pressure.
2. Slim design makes it easy to handle and it fits easily inside any shroud.
3. Is operated without pneumatic air supply
Inlet connection: W21,8 x 1/14 or ISO 228/1 - G 1/4
Outlet connection: Connects to Kosanova LPG valves type 176A, 16 mm with and without SRV.
Supply pressures: The Filling Head is designed to operate within the normal supply pressures.
Liquid filling product: 1-15 bar
Filling time approx. 5 sec./kg LPG at 7 bar differential pressure.
Marking: The following information is marked on the Filling Head:
 •Monthandyearofproduction(posdatedbythreemonths).
 •ThecodenumberoftheFillingHead.
Packing: The Filling Heads are individually packed in boxes without instructions.
Function and The Filling Head is easy to operate.
Maintenance: The head outlet is attached firmly to the valve inlet manually. By applying the LPG filling pressure to the filling head,
the head is locked leaktight to the valve and the filling is initiated. When the cylinder is full the filling is stopped by
firmly emoving the filling head from the valve.
MATERIALS AND STANDARDS
The Filling Head is made of corrosion-resistant materials such as stainless steel, brass, aluminium and special polymers. The rubber materials
used are developed and manufactured according to the requirements of EN 549.