Technical data

The features described in this illustration do not bind the manufacturer.

www.cavagnagroup.com

EDITION MAY 2007

LPG VALVES & EQUIPMENT

DIVISION

Filler Valves

FEATURES

Double Back Check Construction - All Omeca filler valves are of the double back check construction where there are: (1) a soft

seated up back check, and (2) a metal–to-metal lower back check seat or also a rubber seated back check like in the 66.1104.

Efficient Flow Characteristics - The efficient flow channel design of the valves gives low flow resistance, prolonging pump and hose life,

and high filling capacity.

One Piece Body Design - 66.1073

Spray Fill - The one piece body 66.1073 gives spray filling when installed in any standard or recessed half coupling. The cooling effect

of spray filling minimizes tank pressure build up, allowing product to remain in the liquid state for faster filling.

• Sealant pre-applied on the tank connection threads on both valves

• Both valves are UL listed

• Smaller filling upper chamber to avoid waste of liquid propane during every filling operation

• All the valves are furnished with yellow plastic caps with strap attached

Note: For replacement components, please refer to the end of the section.

66.1122

66.0.290.1122

Double Check Filler Valve.

66.1232

66.0.290.1232

Part number

Container Line Wrench

connection connection Hex Flats

10 PSI 20 PSI 25PSI 30 PSI 40 PSI 50 PSI 75 PSI

66.1122 3/4" M.NPT

1 3/4 Male ACME

1 3/4" 17 23 - 28 33 37 -

66.1232 1 1/4" M.NPT

1 3/4 Male ACME

1 3/4" 58 - 98 - - 146 186

ORDERING INFORMATION

Propane liquid capacity at various differential pressure (GPM)

NEW

DESIGN

NEW

DESIGN