Technical data

EDITION JUNE 2005
www.cavagnagroup.com
K 7
LPG VALVES & EQUIPMENT
DIVISION
The features described in this illustration do not bind the manufacturer.
LPG Filling Head
for Compact LPG Valves
20, 21, 22, 25.6, 27 mm
Manually Operated
FEATURES
1. Balanced jig for easy suspension between filling operations.
2. Easy to connect and disconnect. Filling is initiated by operating the manual handle.
3. Slim design makes it easy to handle and it fits easily inside any shroud.
Inlet connection: ISO 228/1-G3/8 or W21,8 x 1/14 LH
Outlet connection: Connects to all Compact LPG valves 20 ,21, 22, 25.6 and 27 mm with and without SRV.
Supply pressures: The Filling Head is designed to operate within the normal supply pressures.
Liquid filling product:1-15 bar
Filling time approx. 2.5 sec./kg LPG at 7 bar differential pressure.
Marking: The following information is marked on the Filling Head:
 •Monthandyearofproduction(posdatedbythreemonths).
 •ThecodenumberoftheFillingHead.
Packing: The Filling Heads are individually packed in boxes without instructions.
Function and The Filling Head is easy to operate.
Maintenance: The head outlet is attached to the valve inlet manually. While pressing the manual handle the filling heads makes a
leaktight connection to the valve then opens the valve spindle and the gas starts to flow.
When the cylinder is full the filling is stopped via the scale system. By moving the handle in its opposite direction
the filling head disconnects from the valve.
Suitable for: All compact valves outlets. Specify type of compact valve when ordering.
MATERIALS AND STANDARDS
The Filling Head is made of corrosion-resistant materials such as stainless steel, brass, aluminium and special polymers. The rubber materials
used are developed and manufactured according to the requirements of EN 549.