Technical data

EDITION JUNE 2005
www.cavagnagroup.com
K 11
LPG VALVES & EQUIPMENT
DIVISION
The features described in this illustration do not bind the manufacturer.
LPG Filling Head
for Camping Valves
Manually Operated
MATERIALS AND STANDARDS
The Filling Head is made of corrosion-resistant materials such as stainless steel,brass and special polymers. The rubber materials used are
developed and manufactured according to the requirements of EN 549.
FEATURES
1. Slim design makes it easy to handle and it fits easily inside any shroud.
2.ManualON/OFFhandleatthetopisusedforopen/closeofthegasflowandforattaching/detachingthevalveoutletthread.
3. The LPG inlet is placed at a sufficient distance from the valve connection allowing the inlet to be above most cylinder shrouds.
COLOUR
The Filling Head is supplied in the natural colors of the raw material.
Inlet connection: LPG: 1/4” NPT.
Outlet connection: ConnectstocampingballvalvewithfemalethreadedoutletM16x1,5mm.ValveswithoutandwithoutPRV.
Supply pressures: The Filling Head is designed to operate within the normal supply pressures.
Liquid filling product:1-15 bar.
Filling time as per present valve specification.
Marking: The following information is marked on the Filling Head:
 •Monthandyearofproduction(postdatedbythreemonths).
 •ThecodenooftheFillingHead.
Packing: The Filling Heads are individually packed in cardboard boxes without instructions.
Function and The Filling Head is easy to operate. The threaded filling gun outlet is connected to the valve outlet by rotating the
Maintenance: filling head body clockwise using the open/close handle to apply the rotation.
After connecting and tightening the thread the flow of gas is initiated by switching the handle 180° from the closed
to the open position. The internal filling head spindle will then move towards the valve sphere and open the valve.
When the filling operation should end the handle on the filling head top is switched 180°back to the closed position
and the filling head is disconnected by rotating the body anti-clockwise until it releases itself from the valve thread.
Suitable for:  Omecavalve64-0-590-2028(seeillustrationabove)