Specifications

ManualsBrandsACME ManualsFlood LightiSolution

Technical Specifications

IR-7S/IR-7B/IR-5C

Power AC 120V~60Hz or AC 230/240/250V~50/60Hz

Fuse 20mm Glass 10A Fast Blow

Lamp MSD 250/2 GY9.5

Dimension

695 x 340 x 250 mm (IR-7S/IR-7B)

360 x 340 x 250 mm (IR-5C)

Weight

15 kg (IR-7S/IR-7B)

9.2kg (IR-5C)

IR-6SD/IR-6BD

Power AC 120V~60Hz AC 230/240/250V~50/60Hz

Fuse 20mm Glass 7A Fast Blow

Lamp CDM 150W

Dimension 695 x 340 x 250 mm

Weight 10.7 kg

IR-6S/IR-6B/IR-5S/IR-5B/IR-4C

Power AC 120V~60Hz AC 230/240/250V~50/60Hz

Fuse 20mm Glass 6.3A Fast Blow 20mm Glass 5A Fast Blow

Lamp ELC 24V 250W

Dimension

695 x 340 x 250 mm (IR-6S/6B/5S/5B)

360 x 340 x 250 mm (IR-4C)

Weight

10.6 kg (IR-6S/IR-6B/IR-5S/IR-5B)

8 kg (IR-4C)

IS-6S/IS-6B/IS-3/IS-4

Power AC 120V~60Hz AC 230/240/250V~50/60Hz

Fuse 20mm Glass 6.3A Fast Blow 20mm Glass 5A Fast Blow

Lamp ELC 24V 250W

Dimension

685 x 380 x 200 mm (IS-6S/IS-6B)

375 x 380 x 200 mm (IS-4/IS-3)

Weight

9.4 kg (IS-6S/IS-6B)

7.5 kg (IS-4/IS-3)

Innovation , Quality , Performance

User Guide

Professional Entertainment Technology

Широкий ассортимент оборудования ACME

на www.maxlight.ru

Summary of content (12 pages)

PAGE 1
Technical Specifications IR-7S/IR-7B/IR-5C Power AC 120V~60Hz or AC 230/240/250V~50/60Hz Fuse 20mm Glass 10A Fast Blow Lamp MSD 250/2 GY9.5 695 x 340 x 250 mm (IR-7S/IR-7B) Dimension 360 x 340 x 250 mm (IR-5C) 15 kg (IR-7S/IR-7B) Weight 9.2kg (IR-5C) IR-6SD/IR-6BD Power Fuse Lamp Dimension Weight AC 120V~60Hz 20mm Glass 7A Fast Blow CDM 150W 695 x 340 x 250 mm 10.7 kg AC 230/240/250V~50/60Hz IR-6S/IR-6B/IR-5S/IR-5B/IR-4C Power Fuse Lamp Dimension Weight AC 120V~60Hz AC 230/240/250V~50/60Hz 20mm Glass 6.
PAGE 2
. 7. Fixture Cleaning The cleaning of internal and external optical lenses and/or mirrors must be carried out periodically to optimize light output. Cleaning frequency depends on the environment in which TABLE OF CONTENTS the fixture operates: damp, smoky or particularly dirty surrounding can cause greater accumulation of dirt on the unit’s optics. 1. Safety Instruction џ C lean with soft cloth using normal glass cleaning fluid. џ A lways dry the parts carefully. 2.
PAGE 3
6. Troubleshooting 1. Safety Instruction Please read carefully the instruction, which includes important Following are a few common problems that may occur during operation. Here are some information about installation, operation and maintenance. suggestions for easy troubleshooting: WARNING ¤ A. The unit does not work, no light and the fan does not work 1. Check the connect power and main fuse. Please keep this User Guide for future consultation.
PAGE 4
. 5.5 DMX512 Connection The DMX512 is widely used in intelligent lighting control, with a maximum of 512 channels. Warning ¤ To prevent or reduce the risk of electrical shock or fire, do not expose the unit to rain or moisture. ¤ Never touch bulb with bare fingers as it is very hot after using. ¤ Hot lamp explosion hazard. Do not open the unit within five minutes after switching off. ¤ Do not start on the unit without bulb enclosure or housing are damaged.
PAGE 5
IS-3 2. Technical Specification • Voltage：AC 120V~60Hz or 230V/240V/250V~50/60Hz • Bulb：MSD 250/2 GY9.5 (IR-7S/IR-7B/IR-5C) CDM 150W (IR-6SD/IR-6BD) ELC 24V 250W (IR-6S/IR-6B /IR-5S/IR-5B/ IR-4C/IS-6S/IS-6B/IS-4/IS-3) • The unit is DMX512 fixture. It features full DMX512 control. It can also be linked together in master/slave connection, as many as required in and run by built-in program chase sequences automatically or by sound activation through an internal microphone to create an intelligent effect.
PAGE 6
2.1 Inserting/Exchanging rotating gobos IS-6S/IS-6B/IS-4 ( IS-4 is a 4 channel gobo rotator ) ( For IR-7S/IR-7B/ IR-5C only ! ) DANGER! Install the gobos with the device switched off only. Unplug from mains before! Open the cover by loosening the fastening screw at the sides of the cover. If you wish to use other forms and patterns as the standard-gobos, or if the gobos are to be exchanged, remove the fixation ring with an appropriate tool. Remove the gobo and insert the new gobo.
PAGE 7
IR-6SD/IR-6BD/IR-6S/IR-6B/IR-5S/IR-5BIR-4C ( IR-4C is a 4 channel color changer) 2.
PAGE 8
3. Lamp IR-7S/7B/5C ( IR-5C is a 5 channel color changer ) In case of replacement of the lamp or maintenance, do not open the fixture within 15 minutes until the unit cools down after switching off. MSD 250/2 GY 9.5 (IR-7S/7B/IR-5C) CDM 150W ( IR-6SD/ IR-6BD ) ELC 24V 250W (IR-6S/IR-6B/IR-5S/IR-5B/ IR-4C/IS-6S/IS-6B/IS-4/IS-3) Diagram for lamp changing Because of its high internal pressure, there might be a risk that t he Discharge lamp would explode during operation.
PAGE 9
65. 4 DMX512 Configuration 4.
PAGE 10
4.2 Main Function 5.3.1 iSolution Operation To select any of the given functions, press the MENU button up to when the required one is ¤ Consistent DMX configuration enable iRock and iShow to be linked together and controlled at the same time. showing on the display. Select the function by ENTER button and the display will blink. Use DOWN and UP button to change the mode.
PAGE 11
5.2 Easy Controller Press the MENU button up to when the is showing on the display. Pressing ENTER button and the display will blink. Use DOWN and UP button to select the The easy remote control is used only in master/slave mode. By (normal) or connecting to the 1/4” microphone jack of the first unit, you will find (2 light show) mode or (3 light show) mode or (4 light show).
PAGE 12
Fixture Hours Dimmer Inversion Press the MENU button up to when the Press the MENU button up to when the is blinking on the display. Pressing ENTER button and the display will show the number of working hours of the unit. To go back to the is shown on the display. Pressing ENTER button and the display will blink. Use DOWN and UP button to select the functions press the MENU button again. (normal) or (dimmer inversion) mode.