Professional Entertainment Technology LED-CTL6 USER MANUAL LED CENTER LIGHT
7. Fixture Cleaning 6. DMX 512 Connection 5. DMX 512 Configuration 4. How To Control the Unit 3. Main Function 2. Technical Specification 1. Safety Instruction TABLE OF CONTENTS 1A LED-CTL6 EN61000-4-11: 1994.
pin XLR connectors are more popular than 5 pin XLR. 7. every 30/60 days. 9A y Clean the external optics at least every 20 days. Clean the internal optics at least y Always dry the parts carefully. y Clean with soft cloth using normal glass cleaning fluid. greater accumulation of dirt on the unit’s optics. which the fixture operates: damp, smoky or particularly dirty surrounding can cause periodically to optimize light output.
out of the touch of people and has no one pass by or under it. 3A The equipment must be fixed by professionals. And it must be fixed at a place where is times of the weight of the unit when installing the fixture. weight of 10 times of the unit’s weight. Also always use a safety cable that can hold 12 the structure to which you are attaching the unit is secure and is able to support a unit is firmly fixed to avoid vibration and slipping while operating.
Sound 1 (LED OFF) Manual (LED ON) Select color 1. Red 2. Green 3. Orange 4. Pink 5. Yellow 6. Cyan 7.Blue 8.Magenta 9.White Sound 2 (LED slow blinking) 1-6 Select chase 1 Value 2 #2 4 #3 8 #4 16 #5 32 #6 Channel 13 : dip / on : #1, #3, #4 (1+4+ 8 =13) Channel 9 : dip / on : #1, #4 ( 1 + 8 = 9 ) Channel 5 : dip / on : #1, #3 ( 1+4 =5 ) Channel 1 : dip / on : #1 ( 1 ) • Examples: #1 Dip DMX 512 Address Chart system in the binary code. 64 #7 128 #8 256 #9 7A M/S #10 signal.
plugged into the DMX input jacks (daisy chain). Please refer to the diagram on setting the Dip switches. 3. DMX IN: Receive DMX signal by 3-Pin XLR male socket. address of the unit. 5A and Dip 10 OFF is SLAVE mode. Dips 1-9 are used to set DMX control all the other units for Stand by, Function and Mode programs. 6A microphone jack of the first unit, you will find that the remote control on the first unit will The easy remote control is used only in master/slave mode. By connecting to the 1/4” B.