User Manual

12H
Manual Test
Select the Manual Mode, press the ENTER button to confirm. Use the UP and DOWN button to adjust
the value for Red,Green,Blue,White, Intensity, Durate or Rate from 0~255, press the ENTER button to
confirm. (DMX signal will be the first priority under Manual Mode.) Once selected, press the ENTER
button to store. Press the MENU button back to the last menu without any change or idling 30 seconds
to exit menu mode.
Auto Test
Select Auto Test, press the ENTER button to confirm. The unit will test by itself automatic. Press the
MENU button back to the last menu or idling 30 seconds to exit menu mode.
Temperature
Select Temp., press the ENTER button to confirm. Display will show the temperature of the fixture.
Press the MENU button back to the last menu or idling 30 seconds to exit menu mode.
Fixture Hours
Select Fixture Hours, press the ENTER button to confirm. Display will show the number of working
hours of the unit. Press the MENU button back to the last menu or idling 30 seconds to exit menu mode.
RDM UID
To select
RDM UID, press the ENTER button to confirm, RDM UID will show on the display, press the
MENU button back to exit.
Select Power Mode, press ENTER to confirm that the current Mode is displayed on the display, select
either: Standard or Quiet by the UP/DOWN button, and press ENTER to save. Press the MENU button to
go back to the previous MENU or wait 30 seconds to automatically exit MENU mode.
Power Mode