User Manual

14H
5. How to control the unit
1. By DMX controller；
No need to turn the unit off when you change the DMX address, as new DMX address setting will be
affected at once. Turn on the unit, under the DMX signal , the LED will display the saved channel address
（001-512）.
RDM function table
DMX START 0-512
MANUFAC TURER ACME
DEVICE MODEL DESCRIPTION THUNDERSTRUCK
DMX PERSONALITY DMX
4/4Channel( 8 bit)
DMX 8/8Channel (16
bit) DMX 8/8 Channel
DMX 52/52 Channel
DMX12/1 Piexl
DMX16/2V Piexl
DMX16/2H Piexl
DMX20/3 Piexl
DMX24/4 Piexl
DMX32/6V Piexl
DMX32/6H Piexl
DMX56/12 Piexl
DEVICE LABEL THUNDERSTRUCK
IDENTIFY DEVICE Off/On
DEVICE HOURS
SOFTWARE
RESET DEVICE Warm/Cold