Installation guide

SHOW ACLI COMMANDS N - Z
Version S-C6.1.0 Oracle Communications Session Border Controller ACLI Reference Guide 113
arguments you can narrow the display to view just the
interface and method you want to view.
• ip-cac <IP address>—Display CAC parameters for an IP
address
• publish—Display statistics related to incoming SIP
PUBLISH messages
• agent <agent>—Display activity for the session agent that
you specify
Inbound Sessions:
–Rate Exceeded—Number of times session or burst rate was
exceeded for inbound sessions
–Num Exceeded—Number of times time constraints were
exceeded for inbound sessions
Outbound Sessions:
–Rate Exceeded—Number of times session or burst rate was
exceeded for outbound sessions
–Num Exceeded—Number of times time constraints were
exceeded for inbound sessions
–Burst—Number of times burst rate was exceeded for this
session agent
–Out of Service—Number of times this session agent went
out of service
–Trans Timeout—Number of transactions timed out for this
session agent
–Requests Sent—Number of requests sent via this session
agent
–Requests Complete—Number of requests that have been
completed for this session agent
–Messages Received—Number of messages received by this
session agent
• realm—Display realm statistics related to SIP processing
• routers—Display status of Net-Net SBC connections for
session router functionality
• directors—Display the status of Net-Net SBC connections
for session director funcationality
• <message>—Add one of the below arguments to the end of
a show sipd command to display information about that type
of SIP message:
–INVITE—Display the number of SIP transactions including
an INVITE method
–REGISTER—Display the number of SIP transactions
including a REGISTER method
–OPTIONS—Display the number of SIP transactions
including an OPTIONS method