Installation guide

130 Oracle Communications Session Border Controller ACLI Reference Guide Version S-C6.1.0
CONFIGURATION ELEMENTS A-M ACCOUNT-CONFIG
strategy—Select the strategy used to select the current accounting server
Default Hunt
Values • hunt—Selects accounting servers in the order in which they are listed
• failover—Uses first and subsequent servers in accounting server list
until a failure is received from that server
• roundrobin—Selects accounting server in order, distributing the
selection of each accounting server evenly over time
• fastestrtt—Selects accounting server with the fastest RTT observed
during transactions with the servers
• fewestpending—Selects accounting server with the fewest number of
unacknowledged accounting messages
state—Enable or disable the accounting system
Default enabled
Values enabled | disabled
max-msg-delay—Enter the time in seconds the Net-Net SBC continues to send
each accounting message
Default 60
Values Min: 0 / Max: 2
32
-1
max-wait-failover—Enter the number of accounting messages held in message
waiting queue before a failover situation status is enacted
Default 100
Values Min: 1/ Max: 4096
trans-at-close—Enable the Net-Net SBC to transmit accounting message
information at the close of a session only. Setting this parameter to disabled tells the
Net-Net SBC to transmit accounting information at the start of a session (Start),
during the session (Interim), and at the close of a session (Stop).
Default disabled
Values enabled | disabled
generate-start—Select the type of SIP event that triggers the Net-Net SBC to
transmit a RADIUS Start message
Default ok
Values • none—RADIUS Start message is not generated
• invite—RADIUS Start message is generated once a SIP session INVITE
is received
• ok—RADIUS Start message is generated an OK message in response
to an INVITE is received
generate-interim—SBC to transmit a RADIUS Interim message
Default reinvite-response
Values • ok—RADIUS Start message is generated when an OK message is
received in response to an INVITE