Installation guide

ACCOUNT-CONFIG CONFIGURATION ELEMENTS A-M
Version S-C6.1.0 Oracle Communications Session Border Controller ACLI Reference Guide 131
• reinvite—RADIUS Interim message is generated when a SIP session
reINVITE message is received
• reinvite-response—RADIUS Interim message is generated when a SIP
session reINVITE is received and the system responds to it
• reinvite-cancel—RADIUS Interim message is generated when a SIP
session reINVITE is received, and the Reinvite is cancelled before the
Net-Net SBC responds to it
• unsuccessful-attempt—RADIUS Interim message is generated when a
session set-up attempt from a preference-ordered list of next-hop
destinations is unsuccessful. This can happen when a local policy
lookup, LRT lookup, ENUM query response, or SIP redirect returns a
preference-ordered list of next-hop destinations. The interim message
contains: the destination IP address, the disconnect reason, a
timestamp for the failure, and the number that was called
file-output—Enable or disable the output of comma-delimited CDRs
Default disabled
Values enabled | disabled
file-path—Enter the path in which to save the comma-delimited CDR file. Most
common settings for this parameter are /ramdrv or /ramdrv/logs directories. You
cannot set this parameter to the /code or /boot directories.
max-file-size—Set the maximum file size in bytes for each CDR file
Default 1000000
Values Min: 1000000 / Max: 100000000
max-files—Set the maximum number of files to store on the Net-Net SBC
Default 5
Values Min: 1 / Max: 10
file-rotate-time—Set the time in minutes that the Net-Net SBC rotates the CDR
files; the Net-Net SBC will overwrite the oldest file first
Default 60
Values Min: 2 / Max: 2147483647
ftp-push—Enable or disable the FTP push feature
Default disabled
Values enabled | disabled
ftp-address—Enter the IP address for the FTP server used with the FTP push
feature
ftp-port—Set the TCP port on the FTP server to use with the FTP push feature
Default 21
Values Min: 1 / Max: 65535
ftp-user—Enter the username the Net-Net SBC will use to log in to the FTP server