Installation guide

ACCOUNT-CONFIG > ACCOUNT-SERVER CONFIGURATION ELEMENTS A-M
Version S-C6.1.0 Oracle Communications Session Border Controller ACLI Reference Guide 133
port—Enter the UDP port number associated with the accounting server is
configured here
Default 1813
Values Min: 1025 / Max: 65535
state—Enable or disable this account-server
Default enabled
Values enabled | disabled
min-round-trip—Enter the time in milliseconds of the minimum RTT for an
accounting message for use with the fastest RTT strategy method
Default 250
Values Min: 10 / Max: 5000
max-inactivity—Enter the maximum time in seconds the Net-Net SBC waits when
accounting messages are pending without a response before this account server is
set as inactive for its failover scheme
Default 60
Values Min: 1 / Max: 300
restart-delay—Enter the time in seconds the Net-Net SBC waits after declaring an
accounting server inactive before resending an accounting message to that same
accounting server
Default 30
Values Min: 1 / Max: 300
bundle-vsa—Enable or disable the bundling of the VSAs within RADIUS
accounting on the account-server
Default enabled
Values enabled | disabled
secret—Enter the secret passed from the account-server to the client server; entries
in this field must follow the Text Format
NAS-ID—Enter the value the account-server uses to identify the Net-Net SBC so
messages can be transmitted; entries in this field must follow the Text Format
priority—Enter the number corresponding to the priority for this account server to
have in relation to the other account servers to which you send traffic. The default is
0, meaning there is no set priority.
Default 0
Values Min: 0
Path account-server is a subelement of the account-config element. The full path from
the topmost ACLI prompt is: configure terminal > session-router > account-
config > account-servers.
Release First appearance: 1.0