Installation guide

134 Oracle Communications Session Border Controller ACLI Reference Guide Version S-C6.1.0
CONFIGURATION ELEMENTS A-M AUTHENTICATION
RTC Status Unsupported
Notes This list can contain as many accounting servers as necessary. By default, this list
remains empty. RADIUS will not work unless an account server is configured.
This is a multiple instance configuration element.
authentication
The authentication configuration element is used for configuring an authentication
profile.
Syntax authentication <source-port | type | protocol | allow-local-
authorization | login-as-admin | radius-servers | select | no |
show | done | exit>
Parameters source-port—Enter the port number on the Net-Net SBC to send messages to the
RADIUS server
Default 1812
Values 1645 | 1812
type—Enter the type of user authentication
Default local
Values local | radius
protocol—Select the protocol type to use with your RADIUS server(s)
Default pap
Values pap | chap | mschapv2
allow-local-authorization—Enable this parameter if you want the Net-Net SBC to
authorize users to enter Super (administrative) mode locally even when your
RADIUS server does not return the ACME_USER_CLASS VSA or the Cisco-AVPair
VSA.
Default disabled
Values enabled | disabled
login-as-admin—Enable this parameter if you want users to be logged
automatically in Superuser (administrative) mode.
Default disabled
Values enabled | disabled
radius-servers—Enter the radius-servers subelement
Path authentication is an element under the security path. The full path from the
topmost prompt is: configure terminal > security > authentication.
Release First appearance: 4.0
RTC Status Supported