Installation guide
142 Oracle Communications Session Border Controller ACLI Reference Guide Version S-C6.1.0
CONFIGURATION ELEMENTS A-M DNS-CONFIG > SERVER-DNS-ATTRIBUTES
Syntax dns-config <client-realm | description | client-address-list |
server-dns-attributes | select | no | show | done | exit>
Parameters client-realm—Enter the realm from which DNS queries are received. This value is
the name of a configured realm.
description—Describe the dns-alg configuration element
client-address-list—Enter the IP client realm address(es) from which the Net-Net
SBC can receive DNS queries. This field is required.
server-dns-attributes—Enter the server-dns-attributes subelement
Path dns-config is a subelement under the media-manager path. The full path from the
topmost ACLI prompt is: configure terminal > media-manager > dns-config.
Release First appearance: 1.3
RTC Status Supported
Notes This is a multiple instance configuration element.
dns-config > server-dns-attributes
The server-dns-attributes subelement configures DNS servers.
Syntax server-dns-attributes <server-realm | domain-suffix | server-
address-list | source-address | source-port | transaction-timeout
| address-translation | select | no | show | done | exit>
Parameters server-realm—Enter the realm from which DNS responses are sent. This value
must be the name of a configured realm. This value is required.
domain-suffix—Enter the domain suffixes for which this DNS server attribute list
is used. This field is required, and can start with an asterisk or a period.
server-address-list—Enter a list of DNS server IP addresses used for the specified
domains. This field is required, and can include multiple entries.
source-address—Enter the source IP address from which the ALG sends queries
to the DNS server (i.e., a layer 3/layer 4 source address). This field is required.
source-port—Enter the UDP port number from which the ALG sense queries to
the DNS server (i.e., layer 3/layer 4 source address). This value is required.
Default 53
Values Valid Range: 1025-65535
transaction-timeout—Enter the number of seconds that the ALG maintains
information to map a DNS server response to the appropriate client request. This
value is required.
Default 10 seconds