Installation guide

DNS-CONFIG > SERVER-DNS-ATTRIBUTES > ADDRESS-TRANSLATION CONFIGURATION ELEMENTS A-M
Version S-C6.1.0 Oracle Communications Session Border Controller ACLI Reference Guide 143
Values Min: 0 / Max: 999999999
address-translation—Access the address-translation subelement
Path server-dns-attributes is a subelement under the dns-config element. The full path
from the topmost ACLI prompt is: configure terminal > media-manager > dns-
config > server-dns-attributes.
Release First appearance: 1.3
RTC Status Supported
Notes This is a multiple instance configuration element.
dns-config > server-dns-attributes > address-translation
The address-translation subelement sets the list of IP address translations and
determines how the NAT function for this feature occurs. Multiple entries in this
field allow one DNS-ALG network entity to service multiple Net-Net SBCs or
multiple sets of addresses.
Syntax address-translation <server-prefix | client-prefix | select | no
| show | done | exit>
Parameters server-prefix—Enter the address/prefix returned by the DNS server. The server-
prefix is an IP address and number of bits in slash notation.
client-prefix—Enter the address/prefix to which a response is returned. The client-
prefix is an IP address and number of bits in slash notation.
Path address-translation is a sub-subelement of the media-manager element. The full
path from the topmost ACLI prompt is: configure terminal > media-manager >
dns-config > server-dns-attributes > address-translation.
Release First appearance: 1.3
RTC Status Supported
Notes Values specified for the number of bits dictates how much of the IP address will be
matched. If the number of bits remains unspecified, then the Net-Net SBC will use
all 32 bits for matching. Setting the bits portion after the slash to 0 is the same as
omitting it. This is a multiple instance configuration element.
enforcement-profile
The enforcement-profile sets groups of SIP methods to apply in the global SIP
configuration, a SIP interface, a SIP session agent, or a realm.
Syntax enforcement-profile <name | allowed-methods | sdp-address-check |
select | no | show | done | exit>
Parameters name—Enter the name of the ENUM configuration