Installation guide

144 Oracle Communications Session Border Controller ACLI Reference Guide Version S-C6.1.0
CONFIGURATION ELEMENTS A-M ENFORCEMENT-PROFILE>SUBSCRIBE-EVENT
allowed-methods—Select a list of SIP methods that you want to allow in this set.
Default None
Values INVITE, REGISTER, PRACK, OPTIONS, INFO, SUBSCRIBE, NOTIFY,
REFER, UPDATE, MESSAGE, PUBLISH
sdp-address-check—Enable or disable SDP address checking on the Net-Net SBC.
Default disabled
Values enabled | disabled
Path enforcement-profile is an element under the session-router path. The full path
from the topmost ACLI prompt is: configure terminal > session-router >
enforcement-profile.
Release First appearance: 5.1; Last updated: S-C6.1.0
RTC Status Supported
enforcement-profile>subscribe-event
The subscribe-event subelement defines subscription event limits for SIP per-user
dialogs.
Syntax enforcement-profile>subscribe-event <name | event-type | select |
no | show | done | exit>
Parameters name—Enter a name for this enforcement profile
event-type—Enter the SIP subscription event type for which to set up limits. You
can wildcard this value (meaning that this limit is applied to all event types except
the others specifically configured in this enforcement profile). To use the wildcard,
enter an asterisk (*) for the parameter value.
Path subscribe-event is a subelement under the session-router path. The full path from
the topmost ACLI prompt is: configure terminal > session-router >
enforcement-profile>subscribe-event.
Release First appearance: S-C6.1.0
RTC Status Supported
enum-config
The enum-config is used to configure ENUM functionality on your Net-Net SBC.
Syntax enum-config <name | top-level-domain | realm-id | enum-servers |
timeout | cache-inactivity-timer | lookup-length | max-response-
size | service-type | select | no | show | done | exit>
Parameters name—Enter the name of the ENUM configuration