Installation guide

148 Oracle Communications Session Border Controller ACLI Reference Guide Version S-C6.1.0

CONFIGURATION ELEMENTS A-M H323

• sip-interface—This setting means that the Net-Net SBC will

use the realm associated with the SIP interface on which the

REGISTRATION request arrived

domain-name-suffix—Sets the suffix for Origin-Realm and Origin-Host AVPs that

have a payload string constructed as a domain name. If your entry does not include

the dot, the system prepends one.

Default .com

allow-srv-proxy—Enable this parameter if you want to the proxy bit in the header

Default enabled

Values enabled | disabled

watchdog-ka-timer—Enter the number of seconds to define the interval for

watchdog/keep-alive messages; this is the time in which the Net-Net SBC must

receive a COPS-KA message from the policy server to ensure collection is still valid.

Default 0

Values Min: 0 / Max: 999999999

options—Enter any customer-specific features and/or parameters for this external

policy server. This parameter is optional.

Path ext-policy-server is an element under the media-manager path. The full path from

the topmost ACLI prompt is: configure terminal > media-manager > ext-policy-

server.

Release First appearance: 4.0

RTC Status Supported

h323

The h323 configuration element is the top level of the H.323 configuration, and it

contains h323 parameters that apply globally.

h323-stacks | rfc2833-payload | alternate-routing | codec-

Parameters state—Enable or disable H.323 functionality

Default enabled

Values enabled | disabled

log-level—Select the log level for monitoring H.323 functionality. This parameter

overrides the process-log level field value set in the system-config element only for

H.323 functionality. If the state parameter in this element is set to disabled, this

parameter still overrides the process-log-level field from the system-config element

for H.323.

Default INFO