Installation guide

152 Oracle Communications Session Border Controller ACLI Reference Guide Version S-C6.1.0
CONFIGURATION ELEMENTS A-M H323 > H323-STACKS
Default 0.0.0.0
Notes This command is not RTC supported
max-calls—Enter the maximum number of calls allowed for the network
associated with this H.323 stack
Default 200
Values Min: 0 / Max: 2
32
-1
Notes This command is not RTC supported.
max-channels—Enter the maximum number of concurrent channels (or pathways
used between nodes) allowed for each call associated with this H.323 stack
Default 6
Values Min: 0 / Max: 2
32
-1
Notes This command is not RTC supported.
registration-ttl—Enter the TTL in seconds before a registration becomes invalid.
During the initial registration process, after a registration is confirmed, the TTL
value set by the Gatekeeper in the RCF message will override this field value. This
field is only applicable when the h323-stack: isgateway field is set to enabled.
Default 120
Values Min: 0 / Max: 2
32
-1
Notes This command is not RTC supported.
terminal-alias—Enter a list of alias addresses that identify the H.323 stack
terminal. This field value must be entered as a space-separated type=value string
(e.g., h323-ID=acme01). This field is only applicable when the isgateway field is set
to enabled.
Values • h323-ID
• e164
•url
•email
• ipAddress
Notes This command is not RTC supported.
ras-port—Select a listening port number for RAS requests. When this field value is
0, H.323 stack uses port assigned by the operating system and not the well-known
port 1719.
Default 1719
Values Min: 0, Max: 65535
Notes This command is not RTC supported.
auto-gk-discovery—Enable or disable Automatic Gatekeeper discovery feature
upon start-up. This field is applicable only when h323-stack:isgateway field is
enabled.
Default disabled
Values enabled | disabled