Installation guide

154 Oracle Communications Session Border Controller ACLI Reference Guide Version S-C6.1.0
CONFIGURATION ELEMENTS A-M H323 > H323-STACKS
call-start-fast—Enable or disable conversion of an incoming Slow Start call into a
Fast Start call. This H.323 stack must be the outgoing stack for conversion to work.
If this field is set to disabled, the outgoing call will be set up with the same starting
mode as the incoming call. This parameter must take the opposite value as the call-
start-slow parameter.
Default enabled
Values enabled | disabled
call-start-slow—Enable or disable conversion of an incoming Fast Start call into a
Slow Start call. This H.323 stack must be the outgoing stack for this conversion to
work. If this field is set to disabled, the outgoing call will be set up to have the same
starting mode as the incoming call. This parameter must take the opposite value as
the call-start-slow parameter.
Default disabled
Values enabled | disabled
media-profiles—Enter a list of media profile names used for the logical channels
of the outgoing call. These names are configured in the media-profile element. The
media-profiles field value must correspond to a valid name field entry in a media-
profile element that has already been configured.
prefixes—Enter a list of supported prefixes for this particular H.323 stack
Values e164 | url | h323-ID | ipAddress
Notes This parameter is not RTC supported.
process-registration—Enable or disable registration request processing for this
H.323 stack . Net-Net SBC will process any RRQs that arrive on this H.323 stack if
enabled. Net-Net SBC will not acknowledge any requests and drop all RRQ if
disabled.
Default disabled
Values enabled | disabled
allow-anonymous—Enter the admission control of anonymous connections
accepted and processed by this H.323 stack
Default all
Values • all—allow all anonymous connections
• agents-only—only requests from session agents allowed
• realm-prefix—session agents and address matching realm prefix
options—Enter customer-specific features and/or parameters on a per-stack basis.
This parameter sets a comma-separated list of “feature=value” or “feature”
parameters. This options field affects H.323 behavior for this particular h323 stack
whereas the options field in the main h323 element affects H.323 behavior globally.
Notes This command is not RTC supported.
proxy-mode—Select the proxy functionality for signaling only operation
Values H225 | H245