Installation guide

IMS-AKA-PROFILE CONFIGURATION ELEMENTS A-M
Version S-C6.1.0 Oracle Communications Session Border Controller ACLI Reference Guide 157
ims-aka-profile
The ims-aka-profile configuration element establishes supports IP Media
Subsystem-Authentication and Key Agreement, defined in 3GPPr7 (specifications
in TS 33.203 and call flows in TS 24.228).
Syntax ims-aka-profile <name | protected-server-port | protected-client-
port | encr-alg-list | auth-alg-list | select | no | show | done |
exit>
Parameters name—Enter the name for this IMS-AKA profile
protected-server-port—Enter the port number on which the Net-Net SBC
receives protected messages; 0 disables the function
Default 0
Values Min: 1025 / Max: 65535
protected-client-port—Enter the port number on which the Net-Net SBC sends
out protected messages
Default 0
Values Min: 1025 / Max: 65535
encr-alg-list—Enter the list of encryption algorithms
Default aes-cbc | des-ede3-cbc | null
encr-alg-list—Enter the list of authentication algorithms
Default hmac-sha-1-96
Path ims-aka-profile is an element under the security path. The full path from the
topmost ACLI prompt is: configure terminal > security > ims-aka-profile.
Release First appearance: S-C6.1.0
RTC Status Supported
Notes This is a multiple instance configuration element.