Installation guide

IPSEC>SECURITY-ASSOCIATION CONFIGURATION ELEMENTS A-M

Version S-C6.1.0 Oracle Communications Session Border Controller ACLI Reference Guide 159

Min: 0 / Max: 999999999

options—Enter the appropriate option name for the behavior you want to configure

Path security-association is a subelement of the ipsec path. The full path from the

topmost ACLI prompt is: configure terminal > security> ipsec>security-

association.

Release First appearance: S-C6.1.0

RTC Status

Notes This is a single instance configuration element.

ipsec>security-association

The security-association subelement allows you to configure a security association

(SA), the set of rules that define the association between two endpoints or entities

that create the secured communication.

Syntax security-association <manual | exit>

Parameters manual—Enter the manual subelement where you can manually configure a

security association

Path security-association is a subelement of the ipsec path. The full path from the

topmost ACLI prompt is: configure terminal > security> ipsec>security-

association.

Release First appearance: 5.0

RTC Status Supported

ipsec>security-association>manual

The manual subelement is where you manually configure a security association on

the Net-Net SBC.

Syntax manual <name | spi | network-interface | local-ip-addr | remote-

ip-addr | local-port | remote-port | trans-protocol | ipsec-

| done>

name—Enter the name for this security policy

spi—Set the security parameter index

Default 256

Values Min: 256 / Max: 2302