Installation guide

164 Oracle Communications Session Border Controller ACLI Reference Guide Version S-C6.1.0
CONFIGURATION ELEMENTS A-M LICENSE
Syntax iwf-config <state | media-profiles | logging | add-reason-hdr |
no-sdp-in-invite | select | no | show | done | exit>
Parameters state—Enable or disable the Net-Net SBC’s IWF
Default disabled
Values enabled | disabled
media-profiles—Set the default media SDP profiles that Net-Net SBC uses for
Slow Start IWF calls. This field does not have a relationship with the media-profiles
field found in the h323-stack subelement, as the values configured there affect calls
that take place entirely in H.323. This list must be populated with the SDP codec
names.
Values • PCMU
•PCMA
• G722
• G723
• G726-32
• G728
• G729
• H261
• H263
logging—Enable or disable IWF-related SIP messages logging
Default disabled
Values enabled | disabled
add-reason-hdr—Enable or disable adding the Reason header to IWF calls
Default disabled
Values enabled | disabled
no-sdp-in-invite—Enable or disable sending an SDP offer in the SIP INVITE for
an IWF call originating in H.323 slow start
Default disabled
Values enabled | disabled
Path iwf-config is an element under the session-router path. The full path from the
topmost ACLI prompt is: configure terminal > session-router > iwf-config.
Release First appearance: 1.2.1
RTC Status Supported
Notes This is a single instance configuration element.
license
The license configuration element is used for configuring Acme Packet licenses.