Installation guide

LOCAL-POLICY > POLICY-ATTRIBUTES CONFIGURATION ELEMENTS A-M
Version S-C6.1.0 Oracle Communications Session Border Controller ACLI Reference Guide 167
in the local-policy, session-agent, and the sip-config. These carrier names are global
in scope, especially if they are exchanged in TRIP.
start-time—Set the time of day these policy attributes considered for preference
determination
Default 0000
Values Min: 0000 / Max: 2400
end-time—Set the time of day these policy attributes cease to be considered for
preference determination
Default 2400
Values Min: 0000 / Max: 2400
days-of-week—Enter the combination of days of the week plus holidays that
policy attributes can be considered for preference determination. A holiday entry
coincides with a configured holiday. At least one day or holiday must be specified in
this field.
Default U-S
Values • U—Sunday
•M—Monday
•T—Tuesday
•W—Wednesday
• R—Thursday
•F—Friday
• S—Saturday
• H—Holiday
cost—Enter the cost configured for local policy to rank policy attributes. This field
represents the cost of a route relative to other routes reaching the same destination
address.
Default 0
Values Min: 0 / Max: 999999999
state—Enable or disable these policy attributes as part of the local-policy element
Default enabled
Values enabled | disabled
app-protocol—Select the signaling protocol used when sending messages to the
configured next-hop. When the Net-Net SBC receives an ingress signaling message
and uses local policy to determine the message’s destination, it will interwork the
signaling between protocols (H.323<—>SIP or SIP<—>H.323) if the signaling type
does not match the value configured in the app-protocol field.
Values H323 | SIP
media-profiles—Enter the names of media-profile elements related to the policy
attribute. Media profiles define a set of media formats that the Net-Net SBC can
recognize in SDP. This list does not have to be configured. However, if this list is
configured, there can be as many entries within it as necessary.