Installation guide

LOCAL-RESPONSE-MAP > ENTRIES CONFIGURATION ELEMENTS A-M
Version S-C6.1.0 Oracle Communications Session Border Controller ACLI Reference Guide 169
local-response-map > entries
The entries subelement is used to add a local response map entry for RFC3326
support.
Syntax entries <local-error | sip-status | q850-cause | sip-reason |
q850-reason | method | register-response-expires | select | no |
show | done | exit>
Parameters local-error—Enter the local error that triggers the use of this local response map
Values • invalid-message
• cpu-overload
• media-released
• media-not-allocated
•enum-void-route
sip-status—Enter the SIP response code to use for this error
Values Min: 100 / Max: 699
q850-cause—Enter the Q.850 cause code
sip-reason—Enter the SIP response code description
q850-reason—Enter the Q850 cause code description
method—Enter the name of the locally generated SIP failure response message you
want to map to a 200 OK. When this parameter is left blank, the SIP registration
response mapping feature is turned off.
register-response-expires—Enter the time, in seconds, you want to use for the
expires time when mapping the SIP method you identified in the method
parameter.
Values Min: 0 / Max: 999999999
Path local-response-map-entries is an subelement under the local-response-map
configuration element. The full path from the topmost ACLI prompt is: configure
terminal > session-router > local-response-map > local-response-map-
entries.
Release First appearance: 4.0
RTC Status Supported