Installation guide

170 Oracle Communications Session Border Controller ACLI Reference Guide Version S-C6.1.0
CONFIGURATION ELEMENTS A-M LOCAL-ROUTING-CONFIG
local-routing-config
The local-routing-config element allows you to configure local route tables, giving
the Net-Net SBC the ability to determine nest hops and map E.164 to SIP URIs
locally, providing extensive flexibility for routing.
Syntax local-routing-config <name | filename | prefix-length | select |
no | show | done | exit>
Parameters name—Enter a unique identifier for the local route table. This is the name you use
to refer to this local route table when you configure policy attributes. This is a
required parameter.
filename—Enter the name for the file from which the database corresponding to
this local route table is created. You should use the
.gz format, and the file should
be placed in the
/code/lrt/ directory. This is a required parameter.
prefix-length—Enter the number of significant digits/bits to be used for lookup and
cache storage
Default 0
Values Min: 0 / Max: 999999999
Path local-routing-config is an element of the session-router path. The full path from
the topmost ACLI prompt is: configure terminal > session-router > local-
routing-config.
Release First appearance: 4.1.1
RTC Status Supported
media-manager-config
This media-manager-config element defines parameters used in the media
steering functions performed by the Net-Net SBC including the flow timers.
Syntax media-manager <state | latching | flow-time-limit | initial-
guard-timer | subsq-guard-timer | tcp-flow-time-limit | tcp-
initial-guard-timer | tcp-subsq-guard-timer | tcp-number-of-
ports-per-flow | hnt-rtcp | algd-log-level | mbcd-log-level |
red-flow-port | red-mgcp-port | red-max-trans | red-sync-start-
time | red-sync-comp-time | media-policing | max-signaling-
bandwidth | app-signaling-bandwidth | min-media-allocation | min-
trusted-allocation | deny-allocation | max-untrusted-signaling |
min-untrusted-signaling | tolerance-window | rtcp-rate-limit |
anonymous-sdp | arp-message-bandwidth | fragment-msg-bandwidth |
rfc2833-timestamp | default-2833-duration | rfc2833-end-pkts-
only-for-non-sig | translate-non-rfc2833-event dnsalg-server-
timeout | select | no | show | done | exit>
Parameters state—Enable or disable media management functionality
Default enabled